*mydirectindustry

Catalogs
KOMATSU Forest
XA 233-2 Introductory

XA 233-2 Introductory

1 / 2 PagesView full catalog

XA 233-2 Introductory

Product catalog summary

Technical Data Overview

Standard Equipment:

Automatic chain oiler
Rollernos design saw bar
Spring supported saw bar to minimize potential damage
Automatic saw bar feed and chain drive motor control with one valve
Saw bar cylinder with Torrington bushings for up and down movement
Excellent visibility
Commercial saw motor
Cast steel clamp arms
Cushioned clamp arm cylinders
Constructed of high strength, low alloy durable steel
Delimbing top clamp arms
Easy servicing and maintenance

Features:

High production, fast cycling
Lightweight, compact design
Low initial and operating cost
Adapts to any go-to-tree carrier
Big tree directional felling capabilities

Optional Equipment:

Accumulator
30º lateral tilt (15º left, 15º right)
Hydraulic diverter valve to operate either the accumulator or lateral tilt using oil flow from the top clamp arms

Specifications:

Bar Saw: Fixed mount & accum arms - 3950 lbs (1792 kg); 30° lateral tilt, no accum arms - 4125 lbs (1871 kg); 30° lateral tilt and accum arms - 4460 lbs (2023 kg)
Cutting Capacity: 28" (711 mm)
Cycle Time: 2 - 7 sec.
Saw bar length: 43" (1092 mm)
Chain: 11 BC, 3/4" (19 mm)
Sprocket: 9-tooth solid construction

Hydraulics:

Hydraulic requirements: 35 - 60 gpm (132 - 227 lpm)
System pressure: 2500 - 3650 (17 225 - 25 149 kpa)
Top clamp cylinder: (1) 3.5" (89 mm), Stroke 14" (356 mm)
Bottom clamp cylinder: (1) 3.5" (89 mm), Stroke 14" (356 mm)
Saw bar cylinder: (1) 2" (50.8 mm), Stroke 10" (254 mm)
Lateral tilt cylinder (optional): (2) 3.5" (89 mm), Stroke 14" (356 mm)
Accumulator cylinder (opt): (1) 3" (76 mm), Stroke 10.75" (273 mm)

Note: Komatsu America reserves the right to change specifications without notice or obligation. Products illustrated may be equipped with non-standard equipment. Other manufacturer’s equipment or attachments shown are used for illustration purposes only. Komatsu America does not warrant the safety, reliability, or operation of other manufacturer’s equipment or attachments.

Catalog excerpts

BAR SAW FELLING HEAD Photo may include optional equipment.

Open the catalog to page 1

Technical data Standard Equipment • Automatic chain oiler • Rollernos design saw bar • Spring supported saw bar for less potential damage • Automatic saw bar feed and chain drive motor control with one valve • Saw bar cylinder with Torrington bushings to allow for up and down movement of bar • Excellent visibility • Commercial saw motor • Cast steel clamp arms • Cushioned clamp arm cylinders • Constructed of high strength, low alloy durable steel • Delimbing top clamp arms • Easy servicing and maintenance • High production, fast cycling • Lightweight, compact design • Low initial and operating...

Open the catalog to page 2

XA 233-2 Introductory

XA 233-2 Introductory

Catalog excerpts

All KOMATSU Forest catalogs and technical brochures

Archived catalogs