Forwarders The Komatsu 845 is built to provide the highest possible productivity in thinning and lighter clear cutting. At the same time, it's the forwarder that delivers the best conceivable operating economy but without causing undue impact on the environmental. Here are the 845's most significant strength: Dimensions (eight-wheeler with shortest rear frame option and 600 mm tyres) A. Width 2,620 mm B. Length, total 9,306 mm C. Length, front axle to middle joint 1,850 mm D. Length, middle joint to rear axle 2,897 mm E. Transport height, hoses included and with tire compression 3,800 mm F. Ground clearance, at steering coupling 663 mm NOTE: Stated dimensions are nominal and may vary slightly depending on production tolerances and choice of equipment. Weight Weight from: 16,600 kg Engine Stroke volume: Power, max.: Torque: Fuel tank: AdBlue® tank: AGCO POWER 49 AWF-4V, 4-cylinder diesel engine with turbo and intercooler. EPA Tier 4 Final and EU stage 4. 4.9 l 140 kW DIN at 1,200 - 1,500 RPM. 830 Nm at 1,500 RPM 120 l 15.5 litres Hydraulic system Flow: Hydraulic oil tank: Working pressure, max.: Miscellaneous: Single-circuit load-sensing system with variable piston pump. 280 l/min at 2,000 RPM 127 l 24.5 MPa (245 bar) Dual return oil filters for hydrostat and working hydraulics. Hydraulic oil level warning. Sight glass level check. Clogging indication for return oil filter. Visual alarm in cab. Ex. of other equipment: Water separator. Fuel filter. Throttle, electrical via CAN. Thermostat-controlled fan (electric). Electrical refuelling. Transmission Computer-controlled, hydrostatic mechanical transmission. Direction of travel and driving speed controlled via keypad on the armrest and foot-operated forward/reverse controls in the working position. Transfer gearbox with 2 positions (high and low). Disengageable drive operation. Driving speed: 0-20 km/h Brake system Driving brakes/ Working brake: Parking brake: Braking performance: Fully hydraulic multi-disc brakes. Hydraulic accumulator charging valve. Multi-disc brakes in oil bath. Automatically engaged when working. Spring-action brake with electro-hydraulic control. Emergency brake. Conforms to ISO 11169 and VVFS 2003:17. Cab/Ergonomics Seat: Frame/axles Several rear frame options. Frame with smooth V-shaped bottom made of high-strength steel. Front and rear axles: Geared bogie type “hi clearance” with portal axles housed in the rims. Differential with mechanical differential lock. Internal multi-disc wet brakes. Dampening bogie stops. Ex. of other equipment: Front blade. Stabiliser. Towing point, front and rear. Bogie lift. Heating/ventilation: Noise level: Vibrations: Tested in accordance with applicable ISO standard. Spacious and bright with very good visibility. Thermal and acoustic insulation. Several alternative seat options. Ergonomically designed with headrest, armrests, joystick panels and waist safety belt. Depending on seat selection, different options are available for individual adjustment of the seat cushion, backrest and lumbar support. Seat column with 0-180° working range. Polycarbonate side windows and rear window. Alternative cab with polycarbonate windows throughout. Fully automatic heating and cooling unit ACC. Filtered intake air. As per ISO standard As per ISO standard

845 Crane and grapple Crane: Reach: Lifting torque, gross: Slewing torque, gross: Rotator: Grapple: Crane tip: Ex. of other equipment: Miscellaneous: Windshield wipers and washer on front and rear windows. Driving/acceleration pedal, electric via CAN, in transport position and crane position. Inside rear-view mirror. Ex. of other equipment: • Komatsu Comfort Ride (cab suspension) • Radio with Bluetooth and hands-free support • Seat column with 220° working range • Hand-held fire extinguishers Load bunks: Mounted on runners, movable. FlexBunk, ready for installation of widening kit (option). Load...