Catalogs >
Komatsu Europe >
PW200-7

PW200-7
24Pages

Catalog excerpts

ENGINE POWER 134 kW / 180 HP @ 2.000 rpm OPERATING WEIGHT 18.970 - 22.100 kg BUCKET CAPACITY max. 1,58 m³ HYDRAULIC WHEELED EXCAVATOR

Open the catalog to page 1

HYDRAULIC WHEELED EXCAVATOR WALK-AROUND The PW200-7 is a rugged, productive, all-European machine. Designed and expressly built for European markets, it delivers productivity, reliability and operator comforts in a robust, environmentally-friendly package. Komatsu’s exclusive, on-board, HydrauMind system assists in all operations, providing enhanced machine performance that’s always perfectly matched to the task. Advanced Attachment Control High productivity The PW200-7 is equipped to handle a wide variety of attachments. The advanced attachment control system features: • Operator...

Open the catalog to page 2

HYDRAULIC WHEELED EXCAVATOR Sealed and pressurised cab with standard climate control Low-noise design Low-vibration design with viscous cabin damper mounting Cab moved forward for better visibility Ergonomic control levers Seat specially designed for wheeled machines, with exceptional extra comfort OPERATING WEIGHT 18.970 - 22.100 kg BUCKET CAPACITY max. 1,58 m³ In harmony with the environment • The economy mode reduces fuel consumption • Low operating noise • Designed for easy end-of-life recycling The Komatsu SAA6D107E-1 engine meets EU Stage IIIA and EPA Tier III emission regulations.

Open the catalog to page 3

HYDRAULIC WHEELED EXCAVATOR EMMS EMMS (Equipment Management and Monitoring System) The EMMS is a highly sophisticated system, controlling and monitoring all the excavator functions. The user interface is highly intuitive and provides the operator with easy access to a huge range of functions and operating information. Four working modes The PW200-7 is equipped with three working modes: (P, E, B), plus a lifting mode (L). Each mode is designed to match the engine speed, pump speed, and system pressure with the current operating requirement. This provides the exibility to match equipment...

Open the catalog to page 4

HYDRAULIC WHEELED EXCAVATOR Power mode Economy mode Breaker mode Lifting mode For maximum power and fast cycle times. Normally used for heavy operations such as hard digging and loading. This mode allows access to the ‘PowerMax’ function to temporarily increase the digging force by 7% for added power in tough situations. The environmentallyfriendly mode. For running more quietly during operations at night and/or in urban areas. Fuel consumption and exhaust emissions are reduced. Delivers optimal hydraulic pressure, ow and engine RPMs for powerful breaker operations. Increases the lifting...

Open the catalog to page 5

HYDRAULIC WHEELED EXCAVATOR WORKING ENVIRONMENT PW200-7’s cab interior is spacious and provides a comfortable working environment… SpaceCab™ Comfortable cab The new PW200-7 inner cab volume is 14% greater than the Dash 6 models, offering an exceptionally comfortable operating environment. The large cab enables the seat, with headrest, to be reclined to horizontal. Pressurised cab The standard-equipped climate control, air lter and a higher internal air pressure resist dust entry into the cab. Low-noise design Noise levels are substantially reduced; engine noise as well as swing and...

Open the catalog to page 6

HYDRAULIC WHEELED EXCAVATOR Safety features Multi-position controls Improved, wide visibility The multi-position, proportional pressure control levers allow the operator to work in comfort whilst maintaining precise control. A double-slide mechanism allows the seat and controllers to move together, or independently, allowing the operator to position the controllers for maximum productivity and comfort. The right side window pillar has been removed and the rear pillar reshaped to provide greater visibility. Blind spots have been decreased by 34%. Pump/engine room partition This prevents...

Open the catalog to page 7

HYDRAULIC WHEELED EXCAVATOR FLEXIBILITY ARMS BOOMS Mono boom Two-piece boom Additional hydraulic circuits A 2-way additional hydraulic circuit, electrically controlled from the wrist control levers, is tted as standard. Outriggers Independently controlled outriggers are optionally available on both, the front and rear of the machine. The cylinder protections are standard on the outriggers.

Open the catalog to page 8

HYDRAULIC WHEELED EXCAVATOR The PW200-7 can be specied with an enormous range of work equipment and undercarriage attachments to meet the needs of almost any application. Attachments commonality & functionality The stabilizer and dozer blade are interchangeable, and therefore can be attached on the front or rear of the chassis. The stabilizer and dozer blade are controllable from the monitor panel. The monitor panel has four buttons that allow individual attachment operation as well as collective operation. Toolbox Tough, secure toolbox, integrated in the mudguards. Optionally tted on both...

Open the catalog to page 9

HYDRAULIC WHEELED EXCAVATOR EASY OPERATION As well as operating the standard work equipment movements, the RH wrist control lever is also used to operate the undercarriage. When used in conjunction with the selection switch on the control panel, full independent control of outriggers and dozer blade is immediately available. This feature, together with the automatic axle lock, enables the machine to be moved, stabilized and operated extremely quickly. Breaker control Used for breaker operation when B mode is selected. Clamshell control Anti-clock wise clamshell rotation. Undercarriage...

Open the catalog to page 10

HYDRAULIC WHEELED EXCAVATOR PRODUCTIVITY FEATURES Safe and precise lifting PW200-7’s stability is one of the best in its class. The machine is equipped with boom safety valves and overload caution as standard. This combined with the control of HydrauMind and the power of the lifting mode, gives incredible safe and precise lifting performance. Example: The over-front lifting capacity (reach 6,0 m over front, height 1,5 m) is 8,2 tonnes (outriggers front + rear, mono boom with 2,4 m arm and bucket). Improved fuel consumption PowerMax function With its newly developed Komatsu ECOT3 engine, the...

Open the catalog to page 11

HYDRAULIC WHEELED EXCAVATOR REVOLUTIONARY MACHINE MANAGEMENT The Komatsu Tracking System, KOMTRAX™, provides a revolutionary new way to monitor your equipment, anytime, anywhere. It lets you pin-point the precise location of your machines and obtain real-time machine data. Using GPS location and communication satellite technology, it’s designed to be future proof and will meet your demands today and tomorrow. Komtrax will help you to answer the three most important questions you have about your machine: • Is the machine making money • Is the machine safe • Is the machine in good health For...

Open the catalog to page 12