Catalogs >
Komatsu Europe >
PC290LC/NLC-8

PC290LC/NLC-8
12Pages

Catalog excerpts

Hydraulic Excavator PC290LC/NLC-8 High Reach Demolition Specication ENGINE POWER 149 kW / 200 HP @ 2.050 rpm OPERATING WEIGHT PC290LC-8: 33.980 - 41.010 kg PC290NLC-8: 33.880 - 40.910 kg ATTACHMENT TOOL WEIGHT max. 3.000 kg

Open the catalog to page 1

Specications ENGINE SWING SYSTEM OPERATING WEIGHT (APPR.) HIGH REACH PC290LC-8 Ground pressure EXCAVATION BOOM Ground pressure Ground pressure Triple grouser shoes Operating weight Operating weight, including specied work equipment. High reach includes attachment weight of 3.000 kg. Excavation boom equipment includes 3,2 m arm and 1.290 kg bucket. All include operator, lubricant, coolant, full fuel tank. Operating weight Ground pressure

Open the catalog to page 2

Transport length Maximum boom height (incl. hydraulic lines) Transport weight with LC undercarriage (700 mm shoes, not including additional counterweight) Transport weight with NLC undercarriage (600 mm shoes, not including additional counterweight) Demolition top boom Excavation boom EXCAVATION BOOM HIGH REACH BOOM Total height (incl. hydraulic lines) Support weight Demolition top boom 1) Mid link weight Bucket weight 1) Not including hydraulic cylinder. 2) Including hydraulic cylinders, links, hydraulic lines, stands and stated attachment weight.

Open the catalog to page 3

MACHINE DIMENSIONS_HIGH REACH A Overall width of upper structure 1) 2.710 mm B Overall height of cab, with FOPS 3.400 mm Overall height of cab, without FOPS 3.180 mm C Overall length of basic machine 5.560 mm E Clearance under counterweight 1.250 mm F Machine tail height 2.615 mm H Tumbler centre distance 4.030 mm J Track gauge (LC undercarriage) 2.590 mm Track gauge (NLC undercarriage) 2.390 mm K Track shoe width 600 mm, 700 mm L Overall track width with 600 mm shoes (LC undercarriage) 3.190 mm Overall track width with 600 mm shoes (NLC undercarriage) 2.990 mm Overall track width with 700...

Open the catalog to page 4

EXCAVATION BOOM - BENT POSITION Overall transport length Length on ground (transport) Transport height (to top of cab, with FOPS) Transport height (to top of cab, without FOPS) Transport height (to top of boom) Transport height (to top of hose) EXCAVATION BOOM - STRAIGHT POSITION Overall transport length Length on ground (transport) Transport height (to top of cab, with FOPS) Transport height (to top of cab, without FOPS) Transport height (to top of boom) Transport height (to top of hose)

Open the catalog to page 5

Working Range HIGH REACH DEMOLITION HIGH REACH DEMOLITION A Min. swing radius of arm end pin (max. height) Tail swing radius Min. boom angle from ground at max. height This working range is applicable through 360 degrees (depending upon tted attachment) (for LC undercarriage). For operator and jobsite safety, Komatsu recommend that high reach demolition machines work in line with the trackframe wherever possible.

Open the catalog to page 6

EXCAVATION BOOM - BENT POSITION Max. vertical wall digging depth Max. digging reach at ground level Min. swing radius (bucket loaded) Tail swing radius

Open the catalog to page 7

Working Range EXCAVATION BOOM - STRAIGHT POSITION Max. vertical wall digging depth Max. digging reach at ground level Min. swing radius (bucket loaded) Tail swing radius

Open the catalog to page 8

Lifting Capacity A – Reach from swing center – Rating over front B – Bucket hook height – Rating over side C – Lifting capacities, including – Rating at maximum reach When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights. bucket, bucket linkage and cylinder EXCAVATION BOOM - BENT POSITION 9,0 m Lifting capacity table is published for guidance only, the machine is not intended for use as a crane. Lifting capacities are stated in kg, on the tip of the arm, for machine on rm, level supporting surface. The weight of any attachment used should...

Open the catalog to page 9

Lifting Capacity A – Reach from swing center – Rating over front B – Bucket hook height – Rating over side C – Lifting capacities, including bucket, bucket linkage and cylinder – Rating at maximum reach When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights. EXCAVATION BOOM - STRAIGHT POSITION 10,5 m Lifting capacity table is published for guidance only, the machine is not intended for use as a crane. Lifting capacities are stated in kg, on the tip of the arm, for machine on rm, level supporting surface. The weight of any attachment used...

Open the catalog to page 10

Standard and Optional Equipment ENGINE Komatsu SAA6D107E-1 turbocharged common rail direct injection diesel engine EU Stage IIIA/EPA Tier III compliant Suction type cooling fan with radiator y screen Automatic engine warm-up system Engine overheat prevention system Fuel control dial Auto-deceleration function Engine key stop Engine ignition can be password secured on request Alternator 24 V/60 A Starter motor 24 V/5,5 kW Batteries 2 × 12 V/140 Ah Diesel particulate lter HYDRAULIC SYSTEM Electronic closed-centre load sensing (E-CLSS) hydraulic system (HydrauMind) Pump and engine mutual...

Open the catalog to page 11

Hydraulic Excavator High Reach Demolition Specification Komatsu Europe UESS13901 09/2010 Materials and specifications are subject to change without notice. KOMAriSU is a trademark of Komatsu Ltd. Japan. Printed in Europe - This specification sheet may contain attachments and optional equipment that are not available in your area. Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.

Open the catalog to page 12