D61EX-15E0
6Pages

{{requestButtons}}

Catalog excerpts

D61EX-15E0 - 1

STANDARD EQUIPMENT FOR BASE MACHINE ● Air cleaner, double element with dust indicator ● Alternator, 60 ampere ● Backup alarm ● Batteries, 170 Ah/12V x 2 ● Decelerator pedal ● Electronic instrument monitor panel ● Engine hood and gull-wing side covers ● Fenders ● Floor mat ● Front pull hook ● High mount footrests ● HSS hydrostatic steering system ● Hydraulic drive radiator cooling fan with clean mode ● Hydraulics for Power Angle Tilt dozer ● Lighting system, (includes 2 front, 1 rear) ● Locks, filler caps and covers Muffler with curved exhaust pipe Palm Command Control System (PCCS) Radiator reserve tank Rain Cap (Intake air) Rear cover Rear view mirror ROPS mounting brackets Starting motor, 5.5 kW/24V Suspension seat, reclining with vinyl material ● Track roller guard, center section (EX long track, PX) ● Track roller guard, end sections ● Trackshoe assembly: —Sealed and lubricated track ● 600 mm 24" single grouser shoe (EX) ● 860 mm 34" single grouser shoe (PX) ● Cab Cab accessories: —Cup holder —Lunch box holder —12V Power supply —Sun Visor ● AM/FM Radio with cassette ● Air conditioner ● Heater and defroster ● Suspension seat, reclining with fabric material (cab only) ● Suspension seat, with high back ● Seat, air suspension with high back (cab only) ● Seat belt, retractable ● Hitch, deluxe ● Intake pipe with precleaner ● Hydraulics for ripper (EX) ● Long track arrangement (EX) ● ROPS canopy ● ROPS for cab ● ROPS canopy with sweep ● Light, working, cab additional ● Light, rear working (ROPS canopy, additional) ● Track guard, full length ● AR track assembly (abrasion resistant bushings) ● Underguard, heavy-duty ● Vandalism protection cover for instrument panel CAB ● Additional weight 490 kg 1080 lb ● All-weather, enclosed pressurized cab Meets ISO3449 FOPS Standard. ● Dimensions: —Length: 1760 mm 5'9" —Width: 1325 mm 4'4" —Height: 1595 mm 5'3" —Height from floor to ceiling: 1545 mm 5'1" ROPS FOR CAB ● Additional weight 240 kg 530 lb ● Meets ISO 3471, SAE J/ISO 3471 ROPS standards. ● Dimensions: —Length: 530 mm 1'9" —Width: 1650 mm 5'5" ● Underguards, engine and transmission ● Water separator MULTI-SHANK RIPPER (EX) ● Additional weight (including hydraulic control unit): 1645 kg 3,630 lb ● Beam length: 2170 mm 7'1" ● Maximum digging depth: 665 mm 2'2" ● Maximum lift above ground: 565 mm 1'10" ROPS CANOPY (without cab) ● Meets ISO 3471, SAE J/ISO 3471 ROPS standards, and ISO 3449 FOPS standard. ● Roof dimensions: —Length: 1830 mm 6'0" —Width: 1825 mm 6'0" —Height from operator compartment floor: 1670 mm 5'6" OPTIONAL EQUIPMENT SHOES Models Additional weight Ground contact area Additional ground pressure to tractor -1.0 kPa -0.01 kg/cm2 -0.14 psi Printed in Japan 200701 IP.AD.SIN (10) Photo may include optional equipment. Materials and specifications are subject to change without notice is a trademark of Komatsu Ltd. Japan

Open the catalog to page 1
D61EX-15E0 - 2

CRAWLER DOZER WALK-AROUND Building on the technology and expertise Komatsu has accumulated since establishment in 1921, GALEO presents customers worldwide with strong, distinctive image of technological innovation and exceptional value. The GALEO brand will be employed for Komatsu’s full lineup of advanced construction and mining equipment. Designed with high productivity, and environmental considerations in mind, the machines in this line reflect Komatsu’s commitment to contributing to the creation of a better world. Electronic monitoring system prevents minor problems from developing into...

Open the catalog to page 2
D61EX-15E0 - 3

CRAWLER DOZER PALM COMMAND CONTROL SYSTEM (PCCS) Power train electronic control system Smooth and soft operation Komatsu’s ergonomically designed control system “PCCS” creates an operating environment . with “complete operator control” D61EX/PX utilizes a newly designed power train electronic control system. The controller registers the amount of operator Human-machine interface D61EX/PX is greatly improved through these new features. control (movements of lever and operation of switches) along with machine condition signals from each sensor, to calculate accurately the control of the...

Open the catalog to page 3
D61EX-15E0 - 4

CRAWLER DOZER PRODUCTIVITY FEATURES WORKING ENVIRONMENT Work equipment Operator comfort Large blade Operator comfort is essential for productive work. The Comfortable ride with new cab damper mounting D61EX/PX provides a quiet, comfortable environment where D61EX/PX’s cab mount uses a new cab damper which the operator can concentrate on the work at hand. provides excellent shock and vibration absorbtion capacity with its long stroke. Cab damper mounts soften shocks and for D61EX) yield outstanding production. High-tensile-strength vibration while traveling over adverse conditions, which...

Open the catalog to page 4
D61EX-15E0 - 5

CRAWLER DOZER EASY MAINTENANCE SILENT DESIGN Preventative maintenance Clean engine The SAA6D107E-1 engine is EPA (Environmental Protection Recyclable parts are used to minimize the effects on the Preventative maintenance is the only way to ensure long service life from your equipment. That’s why Komatsu designed the Agency) Tier 3 and EU Stage 3A emission regulations D61EX/PX with conveniently located maintenance points to make necessary inspections and maintenance quick and easy. certified. It developes low emission of NOx, hydrocarbon, and particle matter, without sacrificing power or...

Open the catalog to page 5
D61EX-15E0 - 6

SPECIFICATIONS ENGINE *Net horsepower at the maximum speed of radiator cooling fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 kW 155 HP TORQFLOW TRANSMISSION Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter and a planetary gear, multiple-disc clutch transmission which is hydraulically-actuated and force-lubricated for optimum heat dissipation. D61EX/PX-15E0 Power Shift DRAWBAR PULL VS. SPEED. MAXIMUM USABLE PULL DEPENDS ON TRACTION AND WEIGHT OF TRACTOR INCLUDING MOUNTED EQUIPMENT. Drawbar Pull STEERING SYSTEM Model...

Open the catalog to page 6

All Komatsu Construction and Mining Equipment catalogs and technical brochures

  1. 14CM Series

    5 Pages

  2. 250XPC

    3 Pages

  3. 320XPC

    3 Pages

  4. 77XR

    3 Pages

  5. 44XT

    2 Pages

  6. 285XPC

    3 Pages

  7. 4100XPC

    5 Pages

  8. 4100C BOSS

    5 Pages

  9. 2800XPC

    5 Pages

  10. 2300XPC

    5 Pages

  11. 1900XPC

    8 Pages

  12. PC 230

    20 Pages

  13. PC 210

    28 Pages

  14. PC 190

    24 Pages

  15. HB 215LC

    20 Pages

  16. PC 170LC

    24 Pages

  17. Komatsu 895

    8 Pages

  18. Komatsu 865

    8 Pages

  19. D375A -6

    8 Pages

  20. D375A -5R

    8 Pages

  21. D375A-5

    6 Pages

  22. D275AX -5E0

    6 Pages

  23. D275A -5R

    8 Pages

  24. D275A-5

    6 Pages

  25. D155AX -6

    6 Pages

  26. D155A-6

    6 Pages

  27. D155A -5

    6 Pages

  28. D85EX-15R

    6 Pages

  29. D85EX-15E0

    6 Pages

  30. D85ESS-2A

    4 Pages

  31. D68ESS-12

    4 Pages

  32. D65E-12

    10 Pages

  33. D63E-12

    4 Pages

  34. HM250-2

    20 Pages

  35. WA380-6

    16 Pages

  36. PC88MR-8

    16 Pages

  37. PC130-8

    28 Pages