KOLVER SCREWDRIVER IS ERGONOMIC Advanced grip design, light in weight, vibrations within the norms, for maximum operator comfort CLEAN No air exhaust + No lubrication = a cleaner environment SAFE Because of the transformer, only 30 V to the tool FLEXIBLE From the controller you can adjust the running speed and the slow start duration. Multi torque models also available for additional functions ACCURATE With the electronic shut off mechanism the accuracy _ is better than +5% of the pre-set value FOR EVERY APPLICATION Range up to 35 Nm, straight, pistol, 90°, ESD, with vacuum, lever start or push to start... NOISELESS Noise within 55 dB(A) COST EFFECTIVE Low purchasing price + virtually no maintenance + no need of compressed air line + no need of spiral hoses & couplers & fil ers & regulators-lubricators = operating cost up to 200 times cheaper than pneumatic screwdrivers 36016 THIENE - ITALY - Via Marco Corner, 19 - Tel. +39 0445 371068 - Fax +39 0445 371069 - [email protected] - www.kolver.it - www.kolver.com Founded in 1989, KOLVER has soon taken the leadership in the European market of precision electric screwdrivers for industry. Thousands of state-of-the-art drivers are produced every year in Italy and then shipped to more than 30 Countries worldwide. ISO 9001 certified since 1998, KOLVER has gained international recognition for building premier quality innovative products that meet or even anticipate the most rigorous customer requirements. The Kolver family of tools is one of the most comprehensive in the electric power tool industry covering a wide range of torque at several speeds, suitable for an indefini e number of applications. Kolver tools feature either shut off clutch or current control system, coreless or brushless motors all controlled by a state of the art electronic control unit. Thanks to their low installation, operating and maintenance costs as well as to their reduced vibration and noise level, Kolver electric screwdrivers represent the perfect alternative to pneumatic screwdrivers for screws up to M10.

TORQUE CHART TORQUE CHART MODEL 36016 THIENE - ITALY - Via Marco Corner, 19 - Tel. +39 0445 371068 - Fax +39 0445 371069 - [email protected] - www.kolver.it - www.kolver.com

FAB & RAF SERIES FAB series electric screwdrivers are our “best sellers” for the electronic industry. RAF series screwdrivers are designed to meet higher torque applications. Their advanced ergonomic design, ease of use, high accuracy and durability have made these drivers the standard by which all others are measured. They are lightweight, compact, powerful and come standard with ESD-safe housing certified to SP method 2472 (Ericsson approved). These screwdrivers are available in an inline body style with either a lever start or push to start or in a pistol grip with a trigger start (also available...

CONTROL UNITS CONTROL UNITS FAB & RAF SERIES All Kolver screwdrivers work in combination with a control unit acting as an AC to DC transformer and torque controller. The electronic control circuit cuts the power supply to the motor as soon as the pre-set torque has been reached. The EDU1FR control units for FAB and RAF screwdrivers feature a maintenance free stateof-the-art electronics with no wearing components with a circuit design suitable to both lever start and push start drivers with protection against current overload up to 10A. This design results in very low current to the driver’s start...

PLUTO CURRENT CONTROL SCREWDRIVERS Kolver’s ingenuity and experience have led to the development of Pluto (PLUs TOrque) screwdrivers, the most advanced DC tools in the market, able to reach 35 Nm of torque (4 times more than any competitor’s tool). They feature: an innovative coreless electric motor with low inertia and friction with absence of iron losses for extreme efficien y and extended life. Planetary gearboxes with high quality composite materials. Pistol grip to fit ope ator’s hand ergonomically. A weight of 550 g to reduce operator’s fatigue. Fully electronic torque control system, manually...

CONTROL UNITS PLUTO SERIES EDU2AE, EDU2AE/HP and EDU2AE/TOP control units act as an AC to DC transformer and torque controller. The electronic control circuit cuts the power supply to the motor as soon as the pre-set torque has been reached. EDU2AE, EDU2AE/HP and EDU2AE/TOP control units can be used in combination with any Kolver current control and/or clutch PLUTO screwdriver. CONTROL UNITS An easy-to-use scroll menu allows to select, set and/or adjust the following functions: • screwdriver model • tightening torque, fastening and unscrewing speed • type of joint (soft/hard) • acceleration ramp...

ELECTRIC SCREWDRIVERS WITH TORQUE AND ANGLE CONTROL Industrial tightening may reguire different control strategies and solutions. The most common cases are: torgue control with angle monitoring and angle control with torgue monitoring. Kolver Multi-Torgue Torgue&Angle controller can manage all such strategies, with up to 8 individual P-sets. The main parameters to be controlled are the tightening torgue applied to the screw and the rotation angle of the screw, with priority to the torgue value. If the torgue and angle values found by the system are within the programmed settings, the motor stops...

PLUTO CLUTCH SERIES & ANGLE SERIES PLUTO CLUTCH SERIES TORQUE RANGE 0,5 - 7,0 NM PLUTO clutch screwdrivers are innovative state-of-the-art screwdrivers. High-efficien y and low inertia CORELESS motors allow high performances on any kind of joint. The new clutch for the regulation of the tightening torque guarantees an excellent accuracy, i.e. 3% on the whole torque range, which means our PLUTOs feature the best CP and CM in the market. PLUTO screwdrivers fulfill the highest environmental protection requirements: minimal vibrations, maximum safety, low noise level, electromagnetic compatibility,...

KBL BRUSHLESS SCREWDRIVERS WITH CLUTCH KBL series electric screwdrivers feature state-of-the-art brushless motors and clutch torque control, the perfect solution for clean room applications thanks to zero emissions of coal dust and other pollutants into the working environment. Small and lightweight for utmost operator comfort and with advanced ergonomic design, they ensure very low noise level, minimum vibrations and maximum safety (low supply voltage). Magnetic clutch switches last 10 times more than traditional switches: the absence of maintenance operations guarantees high productive continuity....