Group: Altra
Catalog excerpts
Kollmorgen AKMH Hygienic Stainless Steel Servomotor TM
Open the catalog to page 1Kollmorgen. Every solution comes from a real understanding of the challenges facing machine designers and users. The ever-escalating demands of the marketplace mean increased pressure on machine designers and users at every turn. Time constraints. Demands for better performance. Having to think about the next-generation machine even before the current one is built. While expectations are enormous, budgets are not. Kollmorgen’s innovative motion solutions and broad range of quality products help engineers not only overcome these challenges but also build truly differentiated machines....
Open the catalog to page 2KOLLMORGEN AKMH HYGIENIC STAINLESS STEEL SERVOMOTOR KOLLMORGEN Because Motion Matters™ Removing the Barriers of Design, Sourcing, and Time At Kollmorgen, we know that OEM engineers can achieve a lot more when obstacles aren't in the way. So, we knock them down in three important ways: Integrating Standard and Custom Products The optimal solution is often not clear-cut. Our application expertise allows us to modify standard products or develop totally custom solutions across our whole product portfolio so that designs can take flight. Providing Motion Solutions, Not Just Components As...
Open the catalog to page 3AKMHTM Hygienic Stainless Steel Servomotor Kollmorgen has designed custom motors for challenging environments for over 70 years. The most notable were the motors used in Jason Jr., the ROV that was used to explore the Titanic. The culmination of these experiences has been leveraged in the AKMH series of motors. Designed for food contact and splash zones, the AKMH reduces cleaning time and maintenance, thus directly contributing to higher overall OEE for machines. Reduced Recall Risk. The Food Modernization Safety Act (FMSA) gives the US federal government the ability to shutdown facilities,...
Open the catalog to page 4AKMH™ Hygienic Stainless Steel Servomotors – The Advantages: Increase of the overall equipment effectiveness (OEE) • Open, hygienic machine design without protective casings • Considerable reduction in the amount of cleaning agents used; less waste water • Protection class IP69K for the motor housing, cable screw connection, and shaft seal • Designed for regular high-pressure and high-temperature cleaning • Cable and sealing elements are resistant to standard cleaning agents • No corrosion inside the motor: pressure compensation via the cable prevents moisture in the motor Lower operating...
Open the catalog to page 5AKMH Design Features A K M H The key benefits of AKMH clean design features: Reduces risk of food recall Increases reliability in all wash-down applications Reduces cleaning time: higher OEE No protective covers required for n washdown – no secondary cleaning n disassembly required n External O-ring and gasket n sealing with blue FDA approved materials n Chemical resistant cable for pH of 2-12, meeting IEC60364-5-52, UL, CSA, CE, RoHS All exposed surfaces are 1.4404 stainless steel which is superior to 1.4301/1.4305 for hygiene & corrosion resistance Smooth surface meeting EHEDG & 3A n...
Open the catalog to page 6n Hygienic marking method eliminates n n harboring of pathogens Unique design technique to eliminate condensation n Single cable for increased reliability, n faster cleaning, and fewer places to harbor pathogens n n Water-tight cable exit n Face Mount or Flange Mount option for easy mounting Hygienic, IP69K shaft seal, special shaft treatment for long life
Open the catalog to page 7AKMH2x Outline DrawingsAKMH2x Frame (All Dimensions in mm)Flange MountFace Mount Flange/Shaft Configuration AKMH2x
Open the catalog to page 8AKMH2x Dimension Data (mm) Mounting Code Mounting Code
Open the catalog to page 9Notes: © Motor winding temperature rise AT=100 K, at 40°C ambient. © All data referenced to sinusoidal commutation. ® Motor with standard heat sink © May be limited at some values of Vbus.
Open the catalog to page 10Notes: ® Motor winding temperature rise, AT=100 K, at 40°C ambient. ® Add parking brake if applicable for total inertia. ® Measured at 25°C. ® Resistance is measured with 1 meter of cable. ® Face mount adds 0.4 kg ® Brake options adds 0.5 kg
Open the catalog to page 11AKMH3x Frame (All Dimensions in mm) Flange Mount Face Mount Flange/Shaft Configuration A
Open the catalog to page 12Code C D E H J K
Open the catalog to page 13Notes: © Motor winding temperature rise AT=100 K, at 40°C ambient. © All data referenced to sinusoidal commutation. ® Motor with standard heat sink © May be limited at some values of Vbus.
Open the catalog to page 14Notes: © Motor winding temperature rise, AT=100 K, at 40°C ambient. ® Add parking brake if applicable for total inertia. ® Measured at 25°C. ® Resistance is measured with 1 meter of cable. ® Face mount adds 0.4 kg ® Brake options adds 0.7 kg
Open the catalog to page 15AKMH4x Outline DrawingsAKMH4x Frame (All Dimensions in mm)Flange MountFace Mount 16
Open the catalog to page 16AKMH4x Dimension Data (mm) Code
Open the catalog to page 17Notes: © Motor winding temperature rise AT=100 K, at 40°C ambient. © All data referenced to sinusoidal commutation. ® Motor with standard heat sink. © May be limited at some values of Vbus.
Open the catalog to page 18AKMH4x Performance Data - Up to 640 V DC (Continued) AKMH41 Notes: © Motor winding temperature rise, AT=100 K, at 40°C ambient. ® Add parking brake if applicable for total inertia. ® Measured at 25°C. ® Resistance is measured with 1 meter of cable. ® Face mount adds 0.8 kg ® Brake options adds 1,14 kg
Open the catalog to page 19AKMH5x Outline DrawingsAKMH5x Frame (All Dimensions in mm) Flange Mount Face Mount
Open the catalog to page 20Continuous Current (Stall) for AT winding = Nom. Ics Arms 2,28 5,02 10,0 2,43 4,81 9,5 10,7 5,29 9,43 15,2 4,35 9,82 15,3 Notes: © Motor winding temperature rise AT=100 K, at 40°C ambient. © All data referenced to sinusoidal commutation. ® Motor with standard heat sink. © May be limited at some values of Vbus
Open the catalog to page 22Notes: © Motor winding temperature rise, AT=100 K, at 40°C ambient. ® Add parking brake if applicable for total inertia. ® Measured at 25°C. ® Resistance is measured with 1 meter of cable. ® Face mount adds 1,5 kg ® Brake options adds 1,8 kg
Open the catalog to page 23All Kollmorgen Europe GmbH catalogs and technical brochures
-
Cartridge DDR
86 Pages
-
Direct Drive DC Torque Motors
12 Pages
-
Electric Cylinder
168 Pages
-
TRUE Planetary™ Gearheads
8 Pages
-
Permanent Magnet DC Motor
14 Pages
-
Automation and Motion Control
140 Pages
-
SERVOSTAR® 300
8 Pages
-
AKD BASIC
2 Pages
-
VLM
2 Pages
-
Decentralized Servo Technology
12 Pages
-
Packaging Solutions
12 Pages
-
AKM1
2 Pages
-
AKM Washdown Gearmotor Flyer
2 Pages
-
Servo Motors / Servomotoren
2 Pages
-
ICH Linear Direct Drive Motors
44 Pages