Cell Voltage Monitor CVM-24P
4Pages

Datasheet kolibrik Cell Voltage Monitor Precise 5 V-range voltage monitor with CAN for fuel-cells, batteries and electrolyzers support@kolibrik.net www.kolibrik.net

Datasheet | CVM-24P | Document version 2.0 2023-09-24 Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM-24P module is ideal for testing and research purposes. CAN bus for use mainly in hydrogen fuel cells and electrolyzers research, testing and applications. For precise 2.5 V-range solution see CVM-64H module and sets. For cost-effective solution for applications see...

Datasheet | CVM-24P | Document version 2.0 2023-09-24 Technical Parameters Power supply 85 x 58 x 13.5 mm (without connector plugs) 4x mounting holes 2.7mm, hex spacers with M2.5 thread Channel count 24 Multiple modules can be daisy-chained to measure hundreds of channels Channel voltage range Input impedance 1 kV between channels and power supply + communication bus Additional isolation can be provided by isolating bus segments Precise 24-bit ADCs All-channel sample rate up to 500 sps Optional digital optocoupler input and output, may work as additional serial line Ambient operating...

Datasheet | CVM-24P | Document version 2.0 2023-09-24 Example of 52-channel connection with chaining of 3 CVM-24P modules (2x24 + 1x4 cells) Disclaimer All rights reserved. All data contained within this manual is for information purposes only and is not guaranteed for legal purposes. The Information has been checked carefully and is believed to be accurate; however, no responsibility is assumed for any inaccuracies. Kolibrik.net, s.r.o. reserves the right to change, modify, or improve this document or the product described herein, as seen fit without further notice. Proprietary Note This...