PROMELT AutoBox pmQuick and simple hotmelt gluer ■ The innovative, simple solution for accurate and economic finishing of corrugated boxes ■ Faster than using a hot-melt glue gun and extremely easy to use ■ Reduce glue costs by up to 50% ■ Applies consistent amount of glue across the length of the glue flap giving excellent adhesion ■ Avoid the potential for RSI associated with glue guns ■ Robust, durable design ■ Ideally suited foam-in-place applications The PROMELT is designed and manufactured to compliment Kolbus Autobox's world leading short-run boxmaking systems. The PROMELT's simple concept allows quick and efficient finishing of virtually any size of corrugated box. A measured amount of hot-melt adhesive is applied across the whole length of the glue flap providing optimum contact surface giving excellent adhesion, every time. The glue chamber heats the hot melt granules giving a constant supply of glue to the wheel(s), with no need for regular refilling, allowing for quick, uninterrupted finishing. Eliminating the need to pick up heavy glue guns time and time again, the PROMELT offers significantly faster finishing whilst reducing the risk of RSI. By using hot-melt granules that allow a consistent amount of glue to each box, both raw material costs and the amount used are dramatically reduced. KOLBUSAutoBoxThe future of boxmaking

Single glue wheel option Control panel Double glue wheel option Open glue chamber Hot melt granules in raw form 3 ltr glue tank volume Safety cut-out switch on glue chamber motor Speed = approx 20 flaps per minute depending board size and operator dexterity Temperature control on glue chamber from 0-250oC Adjustable eccentric pressure wheels Sprung doctor blades to control volume of glue on wheel(s) Temperature controlled switching to engage glue wheels Seals flaps from 15mm to 300mm deep Extending table to aid control of larger board Machine size approx 400mm L x 400mm W x 200mm H Easily cleaned...