Fully automatic high end 3-tank, 3-circuit PowerSpray® XXL ultra-fine cleaning system for cleaning of assembled PCBs Cleans PCBs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances Capacity: up to 830 equals 19 m2 (204.5 ft2) eurocards in up to four variable drawer baskets Artikelnummer: 0900AQ9XH41 Certifications: This system in its basic version was certified for its energy and water saving processing, for easy operability and for the standard integration of comprehensive safety features. Three tank system with three separate circuits Smart Factory ready: DNAccess, remote control, traceability (PLC data scanning and memorizing) Fully automatic 4step (optional up to 5step) process: cleaning, (MediumWipe®), rinsing (tap water), DI-water rinsing, VMH®-TurboDigital hot air evaporative drying 6.5 seconds relative cycle time for the cleaning, rinsing and drying of one eurocard Horizontal PTFE mounted rotor system with up to sic asynchronous spray rotors for thorough wetting (no blind spots) Heater cleaning tank A, automatic water change for the rinsing circuit, DI water system, DI-bypass processing, water measuring unit (ion contamination measurement), ion exchanger and fine filter systems as standard Processes and service intervals PLC controlled. Event issuing and software control via touch screen EDGELESS Design and VARIccess® service access: maximum capacity, easy maintenance on a very small footprint Suitable for high temperature cleaning and rinsing up to 80 °C (176 °F) Assembled PCBs Hybrids (HDIs) Hybrids (SiPs) The new kolb AQUBE® series offer next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and cyber-physically ready for the smart factory. AQUBE® XH9 is a completely German engineered and manufactured fully automatic XXL high volume PCB ultra-fine cleaning system with by far the largest process chamber in a PCB cleaning batch system worldwide and thus with higher capacity per time than even any common inline system: 860 / 19m² (204.5 ft2) eurocards in one cleaning cycle, corresponding to a relative cleaning time of 6.5 seconds per card. With up to 80° (176 °F) cleaning and 120° (248 °F) drying temperature also ideally suited for parts cleaning of medical equipment and use in the production of medical electronics. The three-tank, three-circuit configuration ensures very short cycle times, low running costs and makes this system the perfect economic choice for the precision mass cleaning of assembled PCBs. The cleaning system can be operated with all common electronics cleaning supplies (detergents / chemistry, etc.) which are approved by the manufacturer. Performance description of a fully equipped system. All rights for changes reserved that lead to technical improvement. kolb Cleaning Technology GmbH ▪ Karl-Arnold-Str.12 ▪ D - 47877 Willich (Germany) ▪ Phone: +49 (0) 2154 9479 - 38 ▪ e-mail: [email protected] ▪

AQUBE® XH9 Fully automatic high end 3-tank, 3-circuit PowerSpray® XXL ultra-fine cleaning system for cleaning of assembled PCBs Artikelnummer: 0900AQ9XH41 Application overview Most suitable PCBAs, Hybrids Power electronics Misprints (mounted) Optional suitable Optional suitable Optional suitable Stencils Screens Misprints (bare boards) Solder frames Solder carriers Solder masks ESD Boxes Containers Magazines Not suitable Condensation traps Filters Steel sheets Optional suitable applications can also be optimally realized with the appropriate options. Cleaning (key process 1): From the cleaning...

AQUBE® XH9Fully automatic high end 3-tank, 3-circuit PowerSpray® XXL ultra-fine cleaning system for cleaning of assembled PCBsArtikelnummer: 0900AQ9XH41 Main standard features Performance description of a fully equipped system. All rights for changes reserved that lead to technical improvement. kolb Cleaning Technology GmbH ■ Karl-Amold-Str.12 ■ D - 47877 Willich (Germany) ■ Phone: +49 (0) 2154 9479 - 38 ■ e-mail: [email protected] ■ www.kolb-ct.com Page

AQUBE® XH9Fully automatic high end 3-tank, 3-circuit PowerSpray® XXL ultra-fine cleaning system for cleaning of assembled PCBsArtikelnummer: 0900AQ9XH41 Main options Performance description of a fully equipped system. All rights for changes reserved that lead to technical improvement. kolb Cleaning Technology GmbH ■ Karl-Amold-Str.12 ■ D - 47877 Willich (Germany) ■ Phone: +49 (0) 2154 9479 - 38 ■ e-mail: [email protected] ■ www.kolb-ct.com Page 4 of 7&nbs

CLEANING TECHNOLOGY Made in Germany AQUBE® XH9 Fully automatic high end 3-tank, 3-circuit PowerSpray® XXL ultra-fine cleaning system for cleaning of assembled PCBs Artikelnummer: 0900AQ9XH41 Internal rinse water processing (standard) Cleaning System Cleaning cycle WPSD IU SYMBIO-module Processes mandatory disposable sewage water to be discharged into a public sewage network. Rinsing cycle Options* for water management WPCL IUT-3 SYMBIO-module Recycles DI / DM water for recirculation and multiple reuse in the cleaning systems clear rinsing cycle. Filter ClosedLoop HMA-Filter Fresh / recycled rinse...

AQUBE® XH9Fully automatic high end 3-tank, 3-circuit PowerSpray® XXL ultra-fine cleaning system for cleaning of assembled PCBsArtikelnummer: 0900AQ9XH41 Technical data

kolb CleaninGrid® Technology AQUBE® XH9 systems are suitable for use in a kolb CleaninGrid® plant. The kolb CleaninGrid® technology is an intelligent combination and integration of cleaning, loading, water treatment and control systems to large-scale facilities for the efficient mass cleaning of assemblies, tools and machine parts. The CleaninGrid® technology is completely flexible, constructively easy to execute and based on three connection availabilities: • • • Machine to water processing (C) Machine (A) to machine (A) Machine to loading / unloading automat (B) Machine to water processing...