Fully automatic state ofthe art PowerSpray® fine cleaning system for of assembled PCBs Cleans PCBs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances Capacity: up to 176 equals 2.8m2 (30 ft2) eurocards in up to two variable drawer baskets Part number: 0900AQ5LH21 Certifications: This system in its basic version was certified for its energy and water saving processing, for easy operability and for the standard integration of comprehensive safety features. Two tank system with triple circuit function Smart Factory ready: DNAccess, remote control, traceability (PLC data scanning and memorizing) Fully automatic 4step process: cleaning, rinsing (tap water), DI-water rinsing, VMH®-TurboDigital hot air evaporative drying Horizontal PTFE mounted rotor system with up to four asynchronous spray rotors for thorough wetting (no blind spots) Heater cleaning tank A, automatic water change for the rinsing circuit, DI water system, mixing-blending unit, water measuring unit (ion contamination measurement), ion exchanger and fine filter system as standard Processes and service intervals PLC controlled. Event issuing and software control via touch screen EDGELESS Design and VARIccess® service access: maximum capacity, easy maintenance on a very small footprint Suitable for high temperature cleaning and rinsing up to 80 °C (176 °F) Assembled PCBs Hybrids (HDIs) Hybrids (SiPs) The new kolb AQUBE® series offer next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and cyber-physically ready for the smart factory (SF ready). AQUBE® LH5 is a completely German engineered and manufactured fully automatic standard PCB fine-cleaning system with a capacity of up to 176 (30 ft2) eurocards per cleaning cycle. The configuration with two tanks and triple circuit function ensures short cycle times and makes this system the perfect economic choice for the cleaning of assembled PCBs. With up to 80 °C (176 °F) cleaning and 120 °C (248 °F) drying temperature also ideally suited for parts cleaning of medical equipment and use in the production of medical electronics. The cleaning system can be operated with all common electronics cleaning supplies (detergents / chemistry, etc.) which are approved by the manufacturer. Performance description of a fully equipped system. All rights for changes reserved that lead to technical improvement. kolb Cleaning Technology GmbH ▪ Karl-Arnold-Str.12 ▪ D - 47877 Willich (Germany) ▪ Phone: +49 (0) 2154 9479 - 38 ▪ e-mail: [email protected] ▪ ww

AQUBE® LH5 Fully automatic standard PowerSpray® fine cleaning system for of assembled PCBs Part number: 0900AQ5LH21 Application overview Most suitable Optional suitable Optional suitable Stencils Screens Misprints (bare boards) PCBAs, Hybrids Power electronics Misprints (mounted) Optional suitable Solder frames Solder carriers Solder masks ESD Boxes Containers Magazines Not suitable Condensation traps Filters Steel sheets Optional suitable applications can also be optimally realized with the appropriate options. Cleaning (key process 1): From the cleaning tank A (TA) the cleaner liquid is sucked...

AQUBE® LH5Fully automatic standard PowerSpray® fine cleaning system for of assembled PCBsPart number: 0900AQ5LH21 Main standard features ■ = AQUBE®-exclusive components (vs. kolb PSE Economy series) Performance description of a fully equipped system. All rights for changes reserved that lead to technical improvement. kolb Cleaning Technology GmbH ■ Karl-Amold-Str.12 ■ D - 47877 Willich (Germany) ■ Phone: +49 (0) 2154 9479 - 38 ■ e-mail: [email protected] ■ www.kolb-ct.com Page 3 o

AQUBE® LH5Fully automatic standard PowerSpray® fine cleaning system for of assembled PCBsPart number: 0900AQ5LH21 Main options ■ = = AQUBE®-exclusive components (vs. kolb PSE Economy series) Performance description of a fully equipped system. All rights for changes reserved that lead to technical improvement. kolb Cleaning Technology GmbH ■ Karl-Amold-Str.12 ■ D - 47877 Willich (Germany) ■ Phone: +49 (0) 2154 9479 - 38 ■ e-mail: [email protected] ■ www.kolb-ct.com Page 4

AQUBE® LH5 Fully automatic standard PowerSpray® fine cleaning system for of assembled PCBs Part number: 0900AQ5LH21 Internal rinse water processing (standard) Cleaning System Cleaning cycle ■ AOSelection® unit separates mandatory disposable sewage water from rinse water which can be discharged into a plublic sewage network. Rinsing cycle ■ WPSD IU SYMBIO-module Processes mandatory disposable sewage water to be discharged into a public sewage network. Filter Tank C DI / DM Water Filter ClosedLoop Options* for water management Fresh / recycled rinse water Usable rinse water Filter (Option) Contaminated...

AQUBE® LH5Fully automatic standard PowerSpray® fine cleaning system for of assembled PCBsPart number: 0900AQ5LH21 Technical data Performance description of a fully equipped system. All rights for changes reserved that lead to technical improvement. kolb Cleaning Technology GmbH ■ Karl-Amold-Str.12 ■ D - 47877 Willich (Germany) ■ Phone: +49 (0) 2154 9479 - 38 ■ e-mail: [email protected] ■ www.kolb-ct.com Page 6 of 6