Catalogs >
Koike >
Welding Head Manipulator

Welding Head Manipulator
2Pages

Catalog excerpts

P.O. Box 307, Arcade, New York 14009 Phone (585) 492-2400 FAX (585) 457-3517 17 KOIKE ARONSON, INC. M98 Automatic welding for your largest workpieces up to 30 x 30 size. Additional traverse available. Application versatility with a variety of accessories including Kingpin-Base and Outrigger, Kingpin-Car and Track, Ladders, Walkways, Equipment Towers, Seats, etc. Scarab-III fully equipped to carry operator and Sub-Arc system for welding girth and longitudinal seams on extremely long, large diameter vessels. VRA: 100-3.3 ipm (2540-84mm/pm) Variable Reach, 30:1 SCR DC 1/3 hp VRB: 100-1.7 ipm (2540-43 mm/pm) Variable Reach, 60:1 SRC DC 1/3 hp CR: 100 ipm (2540 mm/pm) Constant Reach, 1/4 hp Brakemotor MR: Manual Handcrank Reach, no power VL: 27-.9 ipm (686-23 mm/pm) Variable Lift, 7 1/2 hp DC Motor CL: 27 ipm (686 mm/pm) Constant Lift, 7 1/2 hp Brakemotor ML: Manual Handcrank Lift, no power VK: .2-.007 RPM Variable Rotation, 1 hp DC Motor CK: .2 RPM Constant Rotation, 1 hp DC Motor MK: Manual Rotation, Wrench-locked VT: 100-3.3 ipm (2540-84 mm/pm) Variable Traverse, 2 hp DC Motor CT: 100 ipm (2540 mm/pm)Constant Traverse, 2 hp Brakemotor MT: Manual Traverse, Wrench-locked Reach: Lift: Kingpin: Car: Power and Speed Options Note: Variable Speed Options have Rapid Traverse and Inching features. Kingpin Base and Outrigger options. With load capacities up to 3000 pounds, the Scarab-III is the largest series of welding head manipulators offered by Koike Aronson. These units provide the most horizontal and vertical arc traverse for welding the largest of workpieces. The Scarab-III series is fully equipped to safely carry and accommodate operators. Welding Head Manipulator SCARAB-III Features

Open the catalog to page 1