Catalogs >
Koike >
IK-12 MAX3

IK-12 MAX3
4Pages

Catalog excerpts

Portable Welding and Gas/Plasma Cutting Features & Benefits ■ Multiple Application Carriage Oxy fuel cut, plasma cut or MIG weld with various attachments ■ Multiple Use Machine Performs straight line and circle cutting or welding ■ Double Cone Stepless Drive System Maintains constant travel speed even with high temperatures; allows greater speed control ■ 10 Optional Torch Kits Allows proper torch selection for each application; Koike’s superior design Series 100 torch tips are included to ensure fast, smooth cuts Serves as Both Cutting and Welding Carriage The IK-12 Max3 is an incredibly robust tractor, developed specifically to adapt to different solutions. With the 1 ½-inch diameter mounting post and 100-pound load capacity, the machine can be outfitted with different torch options in a matter of seconds thus saving you time and money by only having to supply one machine to do the job of many. The disk and cone drive system allows for extremely precise control over travel speed and when complimented by the 2speed gearbox even plasma speeds are achievable. You can customize your machine specifically to your application by adding one of the pre-assembled plasma, welding or oxy-fuel torch sets or pick the specific parts you need on the attached pamphlet. KOIKE ARONSON, INC. / RANSOME ■ Plate Rider Torch Option Automatically maintains torch distance during bevel or straight cutting ■ Extendable 72 in (1800mm) Track Sections Achieves unlimited cut length ■ Optional Snap Valve One-touch on

Open the catalog to page 1

Part 2: Cutting Torch Unit ■ S-100 – For Square or V-Bevel: Single torch unit equipped with a simple holder having no floating function. Standard Pipe Arm Length: 14 in (350mm). Vertical adjustment up to 3 in (80mm). S-200 – For square, V, Y or X-Bevel cutting: Two torch model of S-100. Standard Pipe Arm Length: 20in (500mm). Counter weight attached. Bevel and parallel cutting possible. SP-100 – For Square or V-Bevel Cutting: Single torch unit equipped with a plate rider having a floating function to maintain distance between tip and workpiece. Standard Pipe Arm Length: 14 in (350mm)....

Open the catalog to page 2

Part 3: Track, Accessories and Options Rail Clamp- Magnet Part#ZA3236020 Holds rail steady onto plate Straight Track 72 in (1,800mm) Part #ZM30400 Tracks can be interconnected as required Circle Track Part # BCD19109 Cuts l/2 -14 in (40 - 360mm) inside and 30 - 45 in (770 - 1,150mm) outside, counter weight recommended. 1. Plasma Torch Holder Part#ZM61278 2. Oxy-Fuel Torch Holder Part#ZS61108 Extreme Duty Track 72 in (1,800mm) Part #ZS30407 Recommended when cutting thick plate over 6 in (I 50mm); tracks can be interconnected as required Vertical slide bars for roller bracket Part#ZS30390: 6...

Open the catalog to page 3

MODELS DESCRIPTIONS S-100 Set Acetylene Kit S-100 Set LPG Kit (1) IK-12Max3 Unit* (1) S-100 1 Torch Set (3) Cutting Tips -102 for Acetylene, 106 for LPG (1) Rail 72in (1800mm) S-200 Set Acetylene Kit S-200 Set LPG Kit (1) IK-12Max3 Unit* (1) S-200 2 Torch Set (6) Cutting Tips -102 for Acetylene, 106 for LPG (1) Rail 72in (1800mm) SP-100 Set Acetylene Kit SP-100 Set LPG Kit (1) IK-12Max3 Unit* (1) SP100 Torch Set (3) Cutting Tips -102 for Acetylene, 106 for LPG (1) Rail 72in (1800mm) SP-200 Set Acetylene Kit SP-200 Set LPG Kit (1) IK-12Max3 Unit* (1) SP200 Torch Set (6) Cutting Tips -102 for...

Open the catalog to page 4