Catalogs >
Koike >
HEAD & TAILSTOCKS

HEAD & TAILSTOCKS
28Pages

Catalog excerpts

CUTTING, POSITIONING & WELDING EQUIPMENT KOIKE ARONSON RANSOME The Most Complete Line in the Industry

How to Size Head & Tailstocks Weight Capacity The basic Head and Tailstock configuration includes (1) Powered rotation Headstock and a companion Non Powered Tailstock. The Headstock supports one end of the work-piece and imparts rotational motion to the work. The Tailstock merely supports the other end of the workpiece as it rotates. The first factor in selecting a HTS is to determine the maximum weight capacity required. The load should be evenly distributed between the Head and Tailstock, if either supports more than half of the load, (determined on CG location along the rotational...

Open the catalog to page 4

Load Capacity Tables Load off Rotation CG Lbs. @ 6" Rotation Torque In/Lbs. Max. Load between Head & Tail (Lbs.)

Open the catalog to page 5

ARONSON Series Fixed Height 2.5 ton thru 10 ton Capacity Features Piloted tables for centering loads NEMA 12 Electricals Full length table slots Chassis mounted weld current grounding blocks Low voltage hand control pendants 50:1 Variable speed drives AC brake motors Koike Aronson / Ransome manufactures Head and Tailstock Positioners with a wide range of capacities and options. These units are a strong and simple solution for the rotation of long elliptical work pieces. When used together, they require much less floor space than a Gear Driven Positioner of similar capacity. Head and...

Open the catalog to page 6

dimensions are for reference only and subject to change without notice. PAGE 7 Q Koike Aronson Inc. P.O. Box 307, Arcade, New York 14009 Phone (585) 492-2400 Fax (585) 457

Open the catalog to page 7

ARONSON Series Fixed Height 16 ton thru 120 ton Capacity Features Piloted tables for centering loads NEMA 12 Electricals Full length table slots Chassis mounted weld current grounding blocks Low voltage hand control pendants 50:1 Variable speed drives AC brake motors Koike Aronson / Ransome manufactures Head and Tailstock Positioners with a wide range of capacities and options. These units are a strong and simple solution for the rotation of long elliptical work pieces. When used together, they require much less floor space than a Gear Driven Positioner of similar capacity. Head and...

Open the catalog to page 8

Q Koike Aronson Inc. P.O. Box 307, Arcade, New York 14009 Phone (585) 492-2400 Fax (585) 457-3517 PAGE 9

Open the catalog to page 9

ARONSON Series Geared Elevation 2.5 ton thru 10 ton Features Multiple lift drive pinions 50:1 AC Variable speed rotation Low efficiency gear-boxes for safety 360° continuous rotation Low voltage hand control pendants Koike Aronson / Ransome geared elevation Head and Tailstock Positioners provide all the advantages of standard fixed height models but also include adjustable elevation to provide ergonomic working heights and improve safety. Gear rack cut into vertical posts and multiple interlocked drive pinions provide the highest degree of safety in the industry. NEMA 12 electricals, ground...

Open the catalog to page 10

Specifications HTS 5-GE thru HTS 20-GE MODEL ***All dimensions are for reference only and subject to change without notice.

Open the catalog to page 11

Constant Centerline, Steel wheels, Tachometers, foot controls and special engineered designs available. ARONSON Series Geared Elevation 16 ton thru 120 ton Capacity Features Multiple lift drive pinions 50:1 AC Variable speed rotation Low efficiency gear-boxes for safety 360° continuous rotation Low voltage hand control pendants Koike Aronson / Ransome geared elevation Head and Tailstock Positioners provide all the advantages of standard fixed height models but also include adjustable elevation to provide ergonomic working heights and improve safety. Gear rack cut into vertical posts and...

Open the catalog to page 12

Specifications HTS 32-GE thru HTS 240-GE MODEL Rotation: Torque, In-Lbs. (N.m) Rotation: Speed Range Motor HP (AC variable Frequency) Load Capacity, Lbs. (kg) Max. Between Head & Tail 12” CG Height Overhung load on either or Both 18” CG Height Head or Tailstock 24” CG Height 30” CG Height 36” CG Height 42” CG Height 48” CG Height 54” CG Height 60” CG Height 72” CG Height Pendant cable length Ground current (Amps) A: CL height Range In(mm) Elevation speed ipm(mm/min) Motor HP (Qty 2) B: Table Size (Round) C: Max. Clamping Dia. D: No. of slots and width E: Table Thickness Pilot hole and Depth...

Open the catalog to page 13

Constant Centerline, Steel wheels, Tachometers, foot controls and special engineered designs available. RANSOMESeries Ball Screw Elevation 2.5 ton thru 10 ton Features Low efficiency gear-boxes for safety Ball screw jacks for high duty cycles Machined tables Low voltage hand control pendants The Powered Elevation design makes maximum use of proven commercially available components, both in the elevation and rotation systems. Elevation is by means of commercial Ball screw jacks for high duty cycle operation and driven by a worm/wormgear arrangement. The elevation axis uses two of these screw...

Open the catalog to page 14

Specifications 2H/2T-PE thru 5H/5T-PE MODEL Load Capacity, Lbs. (kg) Max. Between Head & Tail 12” CG Height 18” CG Height 24” CG Height 30” CG Height 36” CG Height 42” CG Height Rotation: Torque, In-Lbs. (N.m) Rotation: Speed Range Motor HP (AC variable Frequency) Pendant cable length Ground current (Amps) A: CL height Range In(mm) Elevation speed ipm(mm/min) Motor HP (Qty 2) B: Table Size (Round) C: Max. Clamping Dia. D: No. of slots and width E: Table Thickness Pilot hole and Depth Thru-hole F: Table nut thread Standard Voltage ***All dimensions are for reference only and subject to...

Open the catalog to page 15

Series RANSOME Ball Screw Elevation 16 ton thru 80 ton Features Low efficiency gear-boxes for safety Ball screw jacks for high duty cycles Machined tables Low voltage hand control pendants 50:1 AC Variable speed drives The Powered Elevation design makes maximum use of proven commercially available components, both in the elevation and guidance systems. Elevation is provided by means of commercial Ball screw jacks for high duty cycle operation and driven by a worm/wormgear arrangement. Elevation uses two of these screw jacks for redundancy, coupled together and driven by a common motor....

Open the catalog to page 16