*mydirectindustry

9EFKOZD

Product catalog summary

Engine Features
The generator is diesel-fueled and certified by the EPA to meet Tier III marine auxiliary standards. It features a four-cylinder, four-cycle engine with a closed cooling system and a heat exchanger. An electric fuel lift pump and a lifting eye are also included.

Generator Features
The generator includes a remote start 12-pin connector, Class H insulation, multivoltage adjustability, and voltage regulation of ±1.0%. It is equipped with radio suppression.

Advanced Digital Control Features
The ADC IId is designed for sophisticated electronics, featuring a 12 x 2 LCD display, sealed connectors, and selectable CANbus outputs. It allows remote monitoring of fault conditions and includes a pushbutton dial for configuration.

Optional Accessories
Available accessories include an aluminum sound shield, remote digital gauge, siphon break, ignition protected starter, and circuit breakers.

Generator Ratings
The 11EKOZD model operates at 60 Hz with a power output of 11 kW/kVA, while the 9EFKOZD model operates at 50 Hz with a power output of 9 kW/kVA. Both models are rated for marine continuous use per ISO standards.

Engine Specifications
The engine is a 4-cycle, naturally aspirated type with a displacement of 1.372 L. It has a compression ratio of 24.5:1 and operates at 1800 rpm for 60 Hz and 1500 rpm for 50 Hz.

Cooling System
The cooling system has a capacity of 4.3 L and features a belt-driven seawater pump. Heat rejection to cooling water is 19.6 kW for 60 Hz and 18.7 kW for 50 Hz.

Fuel System
The fuel system includes an electric fuel shutoff solenoid and pump, with a maximum recommended fuel lift of 1.2 m.

Lubrication System
The oil pan capacity is 3.4 L, and the system uses a pressure, trochoid pump.

Operation Requirements
Air and exhaust requirements are specified for both 60 Hz and 50 Hz models, with detailed parameters for combustion air, cooling, and exhaust flow.

Alternator Features
The alternator is brushless with a rotating field design, vacuum impregnated windings, and dynamically balanced rotors. It is direct-connected to the engine and mounted on a drip-proof tray.

Advanced Digital Control IId Features
The controller integrates genset control and voltage regulation, with selectable outputs and a USB interface for software management. It includes a 12-character LCD display and a maintenance minder.

Accessories
Accessories include a sound shield for noise reduction, a siphon break for below-waterline installations, line circuit breakers, a ship-to-shore switch, and remote digital gauges.

Catalog excerpts

Weight, kg (lb.) Wet Dry Length, mm (in.) Width, mm (in.) Height, mm (in.) Generator Ratings Model Generator (Alternator) RATINGS: Marine continuous ratings per ISO 3046, ISO 8528-1, and Kohler ISO rating guideline 2.14. Obtain technical information bulletin (TIB-101) on ratings guidelines for complete ratings definitions. Availability is subject to change without notice. Kohler Co. reserves the right to change the design or specifications without notice and without any obligation or liability whatsoever. Contact your local Kohler generator distributor for availability. SmartCraft™ is a trademark of Mercury Marine, a division of Brunswick Corporation. Marine Generator Set Engine Features • Diesel fueled • Certified by the Environmental Protection Agency (EPA) to conform to Tier III marine auxiliary standards • Four cylinder • Four cycle • Closed cooling system • Heat exchanger • Electric fuel lift pump • Lifting eye Generator Features • Remote start 12-pin connector • Class H insulation • Multivoltage adjustability • Voltage regulation of ±1.0% • Radio suppression ADC IId Advanced Digital Control Features • Designed for today's most sophisticated electronics • Easy to read 12x2 LCD alpha-numeric display • Compact, integrally mounted control • Sealed connectors for maximum corrosion protection • SAE J1939, SmartCraft™, NMEA 2000 selectable CANbus outputs • Remote monitoring of fault conditions • Pushbutton dial for configuration and adjustment • Programmed crank cycle Optional Accessories • Aluminum sound shield • Remote digital gauge (2 or 3 inch) • Siphon break • Ignition protected starter • Circu

Open the catalog to page 1

Engine Electrical Engine Electrical System Battery, voltage Battery charging module Battery, minimum recommendation Starter motor Engine combustion air requirements, L/min. (cfm) 1001 (35.3) 830 (29.3) Generator cooling requirements, L/min. (cfm) 4814 (170) 3964 (140) Exhaust temp., °C (°F) at full load 447 (836) 413 (775) Max. allowed exhaust back pressure, kPa (in. H2O) 8.7 (34.9) 7.1 (28.5) Cooling Cooling System Capacity, L (qt.), approx. Heat exchanger type Seawater pump type Heat rejected to cooling water at rated kW, wet exhaust, kW (Btu/min.) Engine water...

Open the catalog to page 2

Application DataAccessories Advanced Digital Control Ild Features Controller Features: • Integrated genset control & voltage regulation • Selectable Smartcraft™ V1.0, NMEA 2000, & SAE J1939 outputs • Hybrid voltage regulation • USB interface o Ease of uploading and downloading software o Historical and diagnostic information o Real time diagnostics o Front-face accessible o SiteTech™ compatible for setting changes • Metering capabilities • NXP microprocessor with 512 KB Flash and 60 KB RAM • 179 x 126 x 47 mm (7.1 x 5.0 x 1.9 in.) dimension • Programmed preheat for cold starts Display Type/Features: •...

Open the catalog to page 3

KOHLER CO., Kohler, Wisconsin 53044 USA Phone 920-457-4441, Fax 920-459-1646 For the nearest sales and service outlet in the US and Canada, phone 1-800-544-2444 KOHLERPower.com DISTRIBUTED BY: NOTE: Dimensions are shown in mm [in.]. NOTE: This drawing is provided for reference only and is not intended for installation planning. Contact your local distributor for more detailed information. E

Open the catalog to page 4

9EFKOZD

9EFKOZD

Catalog excerpts

All KOHLER POWER SYSTEMS catalogs and technical brochures