Catalogs >
Koganei Corporation >
MANIFOLD REGULATORS

MANIFOLD REGULATORS
1Pages

Catalog excerpts

R300MDA •Regulation of supply pressure can be checked at a single location for all lines. •Stable pressure regulation and large exhaust flow rate in a compact body. •Push lock type regulator knob for light, smooth pressure regulation. Order codes for regulators only1' IN port collective type Number of units 1 — One unit 2 — Two units 10— Ten units Manifold regulator R300 series IN port specification, bracket —1 T-With T module DT—With T module bracket-combined use S — S adapter DS —With S adapter bracket-combined use IN port- Non-Ion specification OUT port Blank-Standard Port size Mounted regulator model MR302 — Built-in check mechanism MR303— Built-in check mechanism for low pressure Station stn.1 — First station stn.2 — Second station stn.10— 10th station Regulator mounting location from the left, with the OUT port faces forward. Pressure gauge specifications - No pressure gauge - <f> 20 A type (bottom piping) IMPa [145psi.] specific ati on - ^20 D type (backside piping) IMPa [145psi.] specification No*2 OUT port Port size 02 — Rc 1/4 03 — Rc 3/8 Pressure gauge specification Blank-No pressure (bottom piping) IMPa [145psi.J specification GD20 -0 20 D type (back side piping) IMPa [145psi.] specification Non-ion specification Blank — Standard specification NCU-Non-ion specification Regulator model MR302 — Built-in check mechanism MR303 — Built-in check mechanism for low pressure Notes: 1. Cannot be used as a single unit. The bracket modules are required for additional units, order separately. 2. For the pressure gauge specifications, order codes, and dimensions, see p.171.

Open the catalog to page 1

MANIFOLD REGULATORS 1Pages

Catalog excerpts

All Koganei Corporation catalogs and technical brochures

MANIFOLD REGULATORS
1Pages