KÖCO-Compact Stud Welding Equipment ELOTOP

Product catalog summary

Overview
The document describes the KÖCO-Compact Stud Welding Equipment, specifically the ELOTOP series, designed for high performance and cost-effective drawn-arc stud welding. These models are built for durability in harsh environments and continuous operation.

Key Features

High performance with current regulation and microprocessor control for optimal welding results.
Digital parameter settings for precise and repeatable welds.
20 storage spaces for individual settings.
Intelligent self-diagnosis system to minimize downtime.

Technical Specifications

Stud welding with ceramic ferrule, short cycle, and shielding gas options.
Weldable stud range varies by model, with maximum current ranging from 450A to 3500A.
Time setting range from 20ms to 2000ms, depending on the model.
Gas pre-flow time adjustable from 100ms to 2000ms.
Self-diagnosis features include overheating, short circuit control, mains phase failure, and pilot arc malfunction detection.
Menu available in various languages, with fully controlled thyristor bridge and microprocessor control.
Constant current regulation and repeat cycle lock.
Mains connection at 50/60 Hz, 3-phase, with special voltage options.
Protection class IP 23 with dust and moisture protection.
Cooling type F, with steel housing and powder-coated finish.
Dimensions and weight vary by model, with options for castors and handles.

Additional Features

Shielding gas equipment available as standard or optional.
Resettable and total stud counters.
Interface for automatic components available as an option.
Various stud welding guns compatible with different models.

Compliance and Updates

Equipment is CE-labeled according to EN 60974-1.
Document updated as of October 2010, subject to technical modifications.

Contact Information
Köster & Co. GmbH, Spreeler Weg 32, D-58256 Ennepetal, Germany. Tel: +49 (0)23 33 8306-0, Fax: +49 (0)23 33 8306-38, Email: [email protected], Website: www.koeco.net

Catalog excerpts

KÖCO-Compact Stud Welding Equipment ELOTOP-1

KÖCO-Compact Stud Welding Equipment ELOTOP High per formance, current 20 storage spaces allow to file compact stud welding equip- individual settings. ment series are laid out for control ensure optimum weld- ing results even during mains highly cost-effective drawn- system increases productivity arc stud welding. Through their perature and long cables. through minimizing machine spec ial features they are designed for rough wear on Digital setting of all param- building sites and continuous eters guarantees precisely repeatable weldings. EL OTOP COMPAC T S T UD WEL DING EQUIPMEN T

Open the catalog to page 1

KÖCO-Compact Stud Welding Equipment ELOTOP-2

C ompact Stud Welding Equipment SERIES ELOTOP Technical data Stud welding with ceramic ferrule Weldable stud range ø (mm) Short cycle stud welding Weldable stud range ø (mm) Stud welding with shielding gas Weldable stud range ø (mm) Current setting range (A) Time setting range (ms) overheating short circuit control mains phase failure malfunction of pilot arc Menu: selection of various languages Fully controlled thyristor bridge Microprocessor control Constant current regulation Repeat cycle lock Mains connection special voltages (V) Mains fusing time-lag at 230/400 V (A) Mains power consumption...

Open the catalog to page 2

KÖCO-Compact Stud Welding Equipment ELOTOP

KÖCO-Compact Stud Welding Equipment ELOTOP

Catalog excerpts

All Köster & Co. GmbH catalogs and technical brochures