General Optical measuring and form testing systems for the three-dimensional measurement of test objects and description the fully automatic determination and evaluation of geometrical parameters. The geometrical parameters of the test object are determined without contact for the purposes of quality assurance and control of the manufacturing process. The evaluation is carried out automatically using the saved nominal contour and tolerances. Field of application LOTOS LS, LOTOS LT LOTOS LSi Stand-Alone use or semi/fully automated Stand-Alone use or semi/fully automated production operation production operation Optimized for integration into the production process for 100% inline inspection. Free loading space for portal or robot loading. Measured quantity Standard Measured quantity Optional Geometrical measurements Shape and position testing: - Circular run-out - Total run-out - Profile shape/surface shape - Fit (minimum circumscribed, maximum inscribed) of all measured contours - Deviation from nominal contours/surfaces (compared to CAD data) - Free contours (free-form surfaces) - Weight of test objects - Interaction between different test objects o Pairing selection for fits o Gap dimensions before installation Calculation of average, minimum, maximum and standard deviation per defined section, per defined section level and over the entire test object for all measured quantities. or customer-specific adapted measuring range Any cross-sections 10...110 mm infinitely variable up to 295.395 mm Any cross-sections 10.170 mm infinitely variable up to 235.395 mm Measuring object height max. 500 mm < 5 seconds per 60 mm object height with a speed of rotation of 360°/s < 10 seconds per 10 mm object height with a speed of rotation of 540 °/s Height resolution 1 mm, Resolution variably adjustable < 5 seconds per 120 mm object height with a speed of rotation 360 °/s Prevention of manipulation and operator errors Technical specifications subject to change without prior notice | ©10/2020 KoCoS Messtechnik AG www.kocos.com Doc. 7611200 Rev. 1.20

Repeating accuracy1 Radius LOTOS LS/LT: 0,01 mm Standard deviation < 0.003 mm Length (axial) LOTOS LS/LT: 0,02 mm Standard deviation < 0.006 mm LOTOS LSI: 0,04 mm Weight 0.2 g Standard deviation < 0.05 g SPC measurement Duration < 7 seconds Recommended frequency 1 x per shift Sensor calibration Duration < 4 minutes Recommended frequency After 90 days or 90,000 measurements / On changes of temperature > 3° Optional: - fully automatic temperature monitoring and compensation Measurement sensor Laser class Class II (FDA (CDRH) part 1040.10), class 2 (IEC 60825-1) Positioning systems Maintenance-free...