Catalogs >
KoCoS Messtechnik AG >
SHERLOG CRX

SHERLOG CRX
2Pages

Catalog excerpts

Fault reports including fault characteristics, fault location calculation and an event log of the associated protection and switch messages are created immediately. Reports can be printed or sent in order to be able to rectify the grid fault quickly and in a targeted manner. Professional Data Analysis The measurement data is analyzed in detail using powerful analysis software on the PC. Extensive graphics and tables, and numerous analysis tools simplify the precise and deep evaluation of the measurement data. DIGI TA L FAULT RECORDING Third-party applications can be supplied with data via IEC 61850 and MODBUS TCP as well as via the device‘s internal (S)FTP server. Operating voltage Type 1: 90...365 VDC and 85...265 VAC, VAC, 47…63 Hz Type 2: 9…18 VDC Type 3: 18…36 VDC Type 4: 36…72 VDC Redundant power supply Analog inputs Small signal inputs (20mA) Data export functions to COMTRADE, PQDIF and CSV also allow the use of manufacturer-independent analysis tools. Transient record analysis Versatile network capabilities SHERLOG devices can be accessed in parallel via two independent Ethernet interfaces from two physically separated networks. These can be, for example, a highly secure internal station network and an external network for remote access. Binary inputs Relay outputs Ethernet interfaces Interlink interface Power consumption Data memory Subject to change without prior notice | 202408 | © KoCoS Messtechnik AG Automatic analysis and reporting of grid faults The associated Expert software enables fully automated and database-supported analysis of grid faults. Slow fluctuation / trend graph KoCoS Messtechnik AG Südring 42 34497 Korbach, Germany Tel. +49 5631 9596-40 info@kocos.com

Open the catalog to page 1

Fault Recorder | Disturbance Recorder | Power Quality Meter | Data Logger The measuring devices of the SHERLOG range combine the monitoring functions of a high-class digital fault- and disturbance recorder with the features of a class A power quality analyzer and continuous data logger in a single system. They can be used to comprehensively monitor power grids and equipment such as generators, lines, bus bars and associated protection devices and switchgears. Outstanding precision Thanks to the very high sampling rate of 200 kHz and a maximum measurement error of <0.05%, SHERLOG devices...

Open the catalog to page 2

SHERLOG CRX 2Pages

Catalog excerpts

All KoCoS Messtechnik AG catalogs and technical brochures

SHERLOG CRX
2Pages