General High-precision ohm meter with an adjustable test current of up to 200 A. description The measuring device is equipped with a rechargeable battery for portable use in switching stations and industrial environments. Two current outputs and two voltage measurement inputs allow the resistance to be measured at two measurement points simultaneously. Used in combination with an ACTAS test system, static and dynamic determination of the main contact resistances is possible on 2 main contact chambers per pole. Voltage measurement Outputs, number Test current Output voltage Adjustable step value Inputs Measuring ranges, Power supply Supply voltage Battery operation independent of the power supply Input: 12 VDC; 2 A max.; 24 W AC adapter Input: 100...240 VAC; 50/60 Hz; 1.4 A Output: 12 VDC; 5.0 A; 60 W max. Battery Charging time ca. 2 h operationNumber of measurements ca. 400 measurements at 200 A of 100 pO 3) High-current High-current sockets 9 mm Measurement Safety sockets 4 mm Housing Hand-held housing Plastic Screen High-resolution, resistive 3.5" touch screen Operation Touch screen and 4 function keys 1 Using the standard cable set Autoranging mode Technical specifications subject to change without prior notice | ©01/2020 KoCoS Messtechnik AG www.kocos.com Doc. 7617000 Rev. 1.10

Internal data memory Operating temperature Storage temperature Relative humidity Degree of protection Safety Product standard Temperature measurement input Measurement functions Version Temperature range 250 tests RJ 45 (Ethernet), USB-B -10°C…50°C -20…60°C 5…95%, non-condensing IP 54 DIN EN 61010-1 300 V~CAT II DIN EN 61326-1 Two-wire -20°C…80°C 2 x resistance measurement Determination of the quality factor BusBar mode Resistance measurement with temperature compensation Dynamic resistance measurement with ACTAS systems 2 main contacts per pole) Technical specifications subject to change without...