Shape and position tolerances in accordance with ISO 1101 for the entire test object, freely definable sections or individual areas can be measured:  Straightness  Circularity  Cylindricity  Perpendicularity  Parallelism  Coaxiality  Circular run-out  Total run-out  Profile shape/surface shape  Deviation from nominal contours/surfaces  Fit (minimum circumscribed, maximum inscribed) of all measured contours Identification of imperfections Geometrical measurements  Volume  Diameter  Radius  Circumference  Length  Angle KoCoS Optical Measurement GmbH Döbereinerstr. 22 99427 Weimar Germany Tel +49 3643 906 38-0 [email protected] www.kocos.com Technical specifications subject to change without prior notice | 202008 | © KoCoS Automation Shape and position testing Optical 2D / 3D measuring system The automatic measuring system LOTOS LT is used for the precise measurement of geometries of any measuring objects, irrespective of their shape. The measurement is carried out by moving a single-point optical sensor along the outer contours of the measuring objects. Due to the extremely high sampling rate, both two- and three-dimensional measurements, including the evaluation of the results, are possible in the shortest time. The IIoT (Industrial Internet of Things) capability enables easy integration into state-of-the-art data and control environments and meets all the requirements for Industry 4.0. The powerful software offers a wide range of possibilities for quality assurance, production monitoring and control as well as for the technological preparation of new manufa

Fast and precise inspection of geometries Optimal cost/benefit ratio Flexible fields of application High operational reliability and availability All requirements for Industry 4.0 / IIoT Check geometry quickly and precisely The test object is rotated on a rotary table for scanning, while a single-point sensor is moved along the test object by means of a vertical precision measuring axis. The geometry can then be checked fully automatically for predefined properties. Because of the wide range of possible uses, applications for in-process testing and for quality testing exist in almost all industries....