EPOS 360
2Pages

EPOS 360 features four voltage signal sources and three current signal sources. The signal characteristics are computed by a highperformance signal processor and output via highaccuracy D/A converters and electronic power amplifiers. The parameters amplitude, phase angle and frequency are separately and independently adjustable, as well as overload and short-circuit protected and can be varied over a wide range during output. Signal sources          4 independent voltage channels up to 300 V 3 independent current channels up to 16 A Synthetic signal generation Wide frequency range Freely selectable signal shapes Play-back of transient signal characteristics High accuracy Very low THD Separate auxiliary power supply Separately and independently adjustable from each other Frequency range Transient Signals Phase angle Binary inputs Binary outputs Touch screen, jog wheel, membrane keyboard with 4 function keys, PC High resolution, resistive 5" touch screen Status LEDs Signalling of active current and voltage outputs and the status of the binary inputs and outputs via LEDs Supply voltage 19" installation housing 3 HE (stationary) Optional: portable housing KoCoS Messtechnik AG Südring 42 34497 Korbach, Germany Tel. +49 5631 9596-40 info@kocos.com www.kocos.com Subject to technical changes | 202011 | © KoCoS Messtechnik AG System concept ELECTRONIC POWER SOURCES Technical data EPOS EPOS 360 . The multi-functional three-phase signal generator! EPOS 360 is the multi-functional three-phase generator which comes into its own whenever maximum power and high signal accuracy are required. Intelligent amplifier technology and fully synthetic signal generation make it possible to issue any signal shape across a wide frequency range or even to play back complex transient signal characteristics. EPOS 360 is designed for use as a stand-alone device or for operation with an ext

During tests these signal characteristics are then “played back“ as transient signal waveforms by EPOS. The TRANSIG-monitor also includes a signal editor which can be used to configure and calculate any signal characteristic. The signal characteristics can be generated from a basic function, such as a sine wave, with one or more superimposed functions, such as a direct component, exponential functions, harmonics, etc. Electronic Power Sources High-precision current and voltage sources are becoming more and more important in many areas of electrical engineering and especially in measuring...