1. Catalogs
  2. KoCoS Messtechnik AG
  3. EPOS 360 Specifications

EPOS 360 Specifications

EPOS 360 Specifications

EPOS 360 Specifications

Product catalog summary
General Overview
The document describes a universal, portable, and highly precise power source with an internal DC supply. It utilizes a high-performance digital signal processor for computing signal characteristics, which are then output via high-accuracy D/A converters and electronic power amplifiers.

Signal Outputs
Signals can be independently set for phase, amplitude, and frequency. Outputs are protected against overload and short-circuit, with internal feedback measurements ensuring output values match setpoints. Connections are made via 4 mm flush-mounted safety sockets.

Technical Specifications
  • General THD: < 0.05%
  • Frequency Accuracy: < 0.01%
  • Frequency Resolution: < 0.001 Hz
  • Phase Angle: 0…360°
  • Phase Resolution: 0.001°

Voltage Outputs
  • Range: 4 x 0…300 V / 75 VA, 1 x 0…600 V / 150 VA
  • Accuracy: < 0.05%
  • Resolution: 13 mV
  • Frequency Range: DC…3 kHz
  • Phase Accuracy: < 0.05°

Current Outputs
  • Range: 3 x 0…16 A / 40 VA
  • Accuracy: < 0.05%
  • Resolution: 1 mA
  • Frequency Range: DC…3 kHz
  • Phase Accuracy: < 0.05°
  • Max. Output Voltage: 4 Vrms, 6 Vpk

DC Output
  • Output Range: 12…260 V
  • Protection: Overload and short-circuit
  • Output Power: 50 W constant

Binary Inputs and Outputs
  • Binary Inputs: 2, Activation range On/High: ≥ 3.7 V, Off/Low: ≤ 2.7 V
  • Binary Outputs: 2 electronic relays, 24 VDC / max. 50 mA, Up to 240 VAC / 300 VDC

Operation
The device operates with PC EPOS software for Windows and features a stand-alone 5" touch screen with 4 function keys and a jog wheel.

System Version
  • Power Supply: Rated voltage 100 to 265 VAC, 47 to 63 Hz, 120 to 265 VDC
  • Wattage: max. 1200 VA
  • Connections: All on the front panel with 4 mm flush-mounted safety sockets
  • Interfaces: USB-A, USB-B, Ethernet (RJ 45)
  • Housing: 19" rack-mounting, 3 U, optional portable housing
  • Dimensions: 483 x 132.5 x 300 mm
  • Weight: 9 kg

Environmental Conditions
  • Operating Temperature: 0…50°C
  • Storage Temperature: -20…60°C
  • Relative Humidity: 5…90%, non-condensing
  • Protection Class: IP20
  • Safety: EN 61010-1 300 V~CAT II
  • EMC Requirements: EN 61326-1: 2013
See more

Catalog excerpts

EPOS 360 Specifications -1

General Universal, portable and highly precise power source with internal DC supply. The signal characteristics are computed by a high-performance digital signal processor and output via high-accuracy D/A converters and electronic power amplifiers. Signal outputs All signals can be set separately and independently of one another as regards phase, amplitude and frequency. All outputs have overload and short-circuit protection. The output values of the current and voltage amplifiers are monitored by means of internal feedback measurements. If the output values do not agree with the setpoint values, a warning is issued to this effect. The device under test is connected via 4 mm flush-mounted safety sockets which are protected against direct contact. General THD Frequency accuracy Frequency resolution Phase angle Phase resolution Accuracy Resolution Frequency range Phase accuracy Current Range outputs Accuracy Resolution Frequency range Phase accuracy Max. output voltage DC output Output range 12.260 V Protection Overload and short-circuit Output power 50 W (constant across the range) Binary inputs Number 2 Activation range On/High: > 3.7 V Protection_The circuit design is tolerant up to ±300 V. Binary outputs Number 2 electronic relays (Photomos) Switching capacity AC/DC 24 VDC / max. 50 mA Technical specifications subject to change without prior notice | ©04/2021 KoCoS Messtechnik AG www.kocos.com Doc. 7614006 Rev. 1.01 V Valid for the 10.100 Hz frequency range

 Open the catalog to page 1
EPOS 360 Specifications -2

Operation PC EPOS operating software for Windows EPOS - Programming interface Stand-alone 5"-touch screen, high-resolution, resistive, 4 function keys and jog wheel Screen High-resolution, resistive 5" touch screen Display elements 7 status LEDs System version Power supply Rated voltage 100 to 265 VAC, 47 to 63 Hz, 120 to 265 VDC Connections All connection points are located on the front panel. 4 mm flush-mounted safety sockets are used Interfaces USB-A, USB-B, Housing 19" housing for rack-mounting, 3 U (stationary) Optional: portable housing, carrying handle can be used as a stand Operating...

 Open the catalog to page 2

All KoCoS Messtechnik AG catalogs and technical brochures

  1. LOTOS Flyer

    2  Pages

  2. INDEC Brochure

    16  Pages

  3. INDEC VD 400

    2  Pages

  4. ARTES 500

    2  Pages

  5. OMCAT Series

    12  Pages

  6. LOTOS LT

    2  Pages

  7. INDEC

    2  Pages

  8. PROMET L100s

    2  Pages

  9. PROMET L10

    2  Pages

  10. PROMET R300

    2  Pages

  11. ACTAS BTT 2.0

    2  Pages

  12. EPOS MC4

    2  Pages

  13. EPOS 360

    2  Pages

  14. ACTAS P360+

    2  Pages

  15. ARTES 600

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.