System High-precision, portable stand-alone test systems for function tests on various types of switchgear device, concept including circuit breakers, disconnectors or earthing switches, regardless of the type of drive unit. Determination of operating times with earthing on both sides. Three-phase dynamic resistance measurement on up to six main contact chambers per pole in combination with PROMET ohm meters. Control panel with 7" touch screen and two function keys. Inputs and outputs via 4 mm safety sockets and push-pull sockets located on the front panel. The system also features an internal memory with a storage capacity of 4 GB. Control Electronic switching outputs (IGBT) for single or three-phase control of the closing and opening coils. outputs All operating sequences can be configured and output in increments of 1 ms. Intrinsically safe via short-circuit and overload protection IGBTs for controlling Voltage 300 VAC/DC the release coils Current 100 A peak Power supply to external sensors Reference voltage for General Recording duration Time resolution Time accuracy A/D-conversion Accuracy Analog inputs Oversampling 200 kHz per measurement channel Sampling rates 500 Hz...30 kHz, adjustable Measuring range close/open15/100 A, internally switchable coil current 300 V AC/DC, internally switchable 500 V AC/DC, internally switchable 100 A peak 15/100 A AC/DC, internally switchable ±20 mA (Imp. 200 Ohm/0.25 W) Coil/station voltage Motor voltage Motor current Measuring range motor cSuernrseonrt inputs Protection P260: 1 x galvanic isolation 2.5 kV, all the inputs are isolated against earth P360: 3 x galvanic isolation 2.5 kV, all the inputs are isolated against earth Binary inputs Sampling rate Auxiliary contacts Incremental inputs for Supply voltage digital travel transducers Limit frequency Activation range 24...300 VDC Wet/dry switching 10 VDC 200 kHz Technical specifications subject to change without prior notice | ©10/2022 KoCoS Messtechnik AG www.kocos.com Doc. 7612010 Rev. 1.10

Complete Operation, system control, data storage and evaluation by means of the built-in control panel equipped with a system high-resolution, resistive 7" touch screen and two function keys as well as via a standard external Windows PC or by remote control via tablet or smartphone User interface ACTAS system software for the parameterization, execution and evaluation of switchgear tests under Windows 7/8.1/10/11 Power supply Rated voltage 110...265 VAC/DC Measurement connections On the front panel via 4 mm safety sockets and via push-pull sockets PC interfaces 1 x RJ45 Ethernet 1 x USB A/B each...