Dosing and Colouring Unit

Dosing and colouring unit KEM-TOUCH for injection machines or extruders New KEM-TOUCH ■ Simple dosing and colouring unit with intuitive controls ■ Masterbatches or additives are dispensed through volumetric cell dosing into a free-flowing main component. ■ For dose weights of 2 g to 2,000 g The controls of KEM-TOUCH are integrated directly into the housing and offer a variety of programs for direct use with injection machines or extruders. ■ The initial impulse either comes from the machine or is controlled by time. ■ Compatible with KOCH modular system components ■ Supply voltage for selection:...

4 programs for direct dosing: ► Program 1 for extruders with constant rpm ► Program 2 for injection machines: The initial impulse is given by the injection machine. ► Program 3 for extruders and blowing machines with variable rpm. Dosing depends on the angular momentum of the extruder auger, which is removed through a contact. ► Program 4 for injection machines: Dosing through a potential-free contact or impulse from the processing machine. Percentage input of the colour ratio. ■ Direct setting of dosing quantities (amounts) in percent or seconds ■ 100 freely configurable recipes (Program 4) ■...

Automatic filling and very easy material change Ring insert and sliding device The rubber-mounted ring insert allows the MIKO conveyor (up to 15 kg/h) to be installed on an acrylic-glass container. In case of frequent material changes, it is advisable to install KEM-TOUCH on a flange with the SV2 sliding device. This makes it very easy to pull the whole station from the material shaft and balance or empty it without tools. Functional: KEM-TOUCH with the AZ flange and SV2 sliding device KEM-Pu (no picture) Direct adding of free-flowing powder Also KEM-Pu for up to 2 kg/h of free-flowing powder...

Modular system Dosing and colouring unit KEM-TOUCH Principle of direct colouring The KEM-TOUCH direct colouring unit is an affordable solution for dosing masterbatches or additives directly into the material feeder of an injection moulding machine or extruder. Thanks to a high precision, KEM ensures the exact same colour shades in the final product. Material conveyor For volumetric dosing, there are various dosing rollers available for weights ranging from 2 g to 10,000 g. Direct colouring unit KEM-TOUCH Material funnel Volumetric dosing of masterbatches or additives Flange for free supply of...

Phone +49 7231 8009-0 [email protected] www.koch-technik.com Peripheral equipment and systems for plastics processing KEM-TOUCH Dosing and Colouring Unit Werner Koch Maschinentechnik GmbH Industriestr. 3 75228 Ispringen Germany