LIFT CAPACITIES A A - Reach from swing centerline B - Height above/below ground C - Lift point Relief valve setting: 20.6 MPa Rating over front C Rating over side or 360 degrees Standard arm: 0.925 m Bucket: without Rubber shoe: 180 mm Dozer blade: up 1.0 m 1.5 m 2.0 m 1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities. 2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 3. Arm top is defined as lift point. 4. The above lift capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lift capacity or 75% of tipping load. Lift capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD. Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice. Enquiries To: Veluwezoom 15 1327 AE Almere The Netherlands www.kobelco-europe.com Complies with the EU Stage V exhaust emission regulation POD0357 | September 2024

Full-Scale Performance in Compact Size The combination of side-ditch digging function and short tail radius makes it easy to dig next to walls with a compact operating footprint. Tail Overhang: Retractable Crawlers Crawlers can be easily extended and retracted by operating a simple lever. Capable of passing through spaces as narrow as 750 mm wide, the SK10SR can be used on a wide variety of urban and industrial site. Precision Digging Close to Walls Requires 1.8 m of Working Space The boom swing feature allows digging of trenches, etc. close up to walls. With a 180° working radius of 1.8 m, SK10SR...

Full-Scale Performance in Compact Size The combination of side-ditch digging function and short tail radius makes it easy to dig next to walls with a compact operating footprint. Tail Overhang: Retractable Crawlers Crawlers can be easily extended and retracted by operating a simple lever. Capable of passing through spaces as narrow as 750 mm wide, the SK10SR can be used on a wide variety of urban and industrial site. Precision Digging Close to Walls Requires 1.8 m of Working Space The boom swing feature allows digging of trenches, etc. close up to walls. With a 180° working radius of 1.8 m, SK10SR...

Great Performance in Tight Places Reliable Construction Wide Working Range Cast Steel Upper Frame Withstands Impacts The SK10SR has plenty of working ranges. Upper frame with integrated counterweight designed to withstand impact to front corners during swing. Avoiding Rupture to Hydraulic Hoses Bucket cylinder hoses sited within the arm Protective cover for hoses behind the boom 2-part type boom cylinder hoses Joint-type dozer hoses Boom Swing Angle Service Valve Provided as Standard Large, Wide-opening Bonnet The boom swing angles of 80 degrees to the left and 50 degrees to the right for optimized...

Great Performance in Tight Places Reliable Construction Wide Working Range Cast Steel Upper Frame Withstands Impacts The SK10SR has plenty of working ranges. Upper frame with integrated counterweight designed to withstand impact to front corners during swing. Avoiding Rupture to Hydraulic Hoses Bucket cylinder hoses sited within the arm Protective cover for hoses behind the boom 2-part type boom cylinder hoses Joint-type dozer hoses Boom Swing Angle Service Valve Provided as Standard Large, Wide-opening Bonnet The boom swing angles of 80 degrees to the left and 50 degrees to the right for optimized...

Comfortable Work Environment WORKING RANGES MODEL Type PERFORMANCE Bucket Capacity ISO heaped (17 kg) Travel Speed (high/low) Swing Speed Swing Torque Maximum Swing Gradient* Gradeability Rated Drawbar Pull (SAE J 1309) Bucket Digging Force Arm Crowding Force WEIGHT Operating Mass Ground Pressure Shoe Width Shoe Type ENGINE Model A clear left-to-right pass-through offers greater convenience for the operator. Wrist Rest Wrist rests fitted on the each control lever box ensure fatigue free operation. Lever Control Delivers Smooth Starts Max. Discharge Flow Relief Valve Setting Hydraulic Oil Tank...

Comfortable Work Environment WORKING RANGES MODEL Type PERFORMANCE Bucket Capacity ISO heaped (17 kg) Travel Speed (high/low) Swing Speed Swing Torque Maximum Swing Gradient* Gradeability Rated Drawbar Pull (SAE J 1309) Bucket Digging Force Arm Crowding Force WEIGHT Operating Mass Ground Pressure Shoe Width Shoe Type ENGINE Model A clear left-to-right pass-through offers greater convenience for the operator. Wrist Rest Wrist rests fitted on the each control lever box ensure fatigue free operation. Lever Control Delivers Smooth Starts Max. Discharge Flow Relief Valve Setting Hydraulic Oil Tank...

LIFT CAPACITIES A A - Reach from swing centerline B - Height above/below ground C - Lift point Relief valve setting: 20.6 MPa Rating over front C Rating over side or 360 degrees Standard arm: 0.925 m Bucket: without Rubber shoe: 180 mm Dozer blade: up 1.0 m 1.5 m 2.0 m 1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities. 2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job...