CKS600
24Pages

{{requestButtons}}

Catalog excerpts

CKS600 - 1

Hydraulic Crawler Crane Model : CKS600 Max. Lifting Capacity: 60 t x 3.0 m * Max. Crane Boom Length: 51.8 m Max. Fixed Jib Combination: 39.6 m + 18.3 m 42.7 m + 12.2 m * c/w

Open the catalog to page 1
CKS600 - 3

GENERAL DIMENSIONS WORKING RANGES SUPPLEMENTAL DATA LIFTING CAPACITIES SUPPLEMENTAL DATA FOR CLAMSHELL LIFTING CAPACITIES SUPPLEMENTAL DATA FOR BARGE LIFTING CAPACITIES TRANSPORTATION PLAN

Open the catalog to page 3
CKS600 - 4

SPECIFICATIONS Power Plant Model: HINO J08E-VM Type: 4 cycle, water-cooled, vertical in-line 6, direct injection, turbo-charger, intercooler Displacement: 7.684 liters Rated power: 213 kW/2,100 min-1 Max. Torque: 1,017 N·m/1,600 min-1 Cooling System: Water-cooled Starter: 24V-5kW Radiator: Corrugated type core, thermostatically controlled Air cleaner: Dry type with replaceable paper element Throttle: Twist grip type hand throttle, electrically actuated Fuel lter: Replaceable paper element Batteries: Two 12V x 136 Ah/5HR capacity batteries, series connected Fuel tank capacity: 400 liters...

Open the catalog to page 4
CKS600 - 5

Lower Structure Steel-welded carbody with axles. Crawler assemblies can be hydraulically extended for wide-track operation or retracted for transportation. Crawler belt tension is maintained by hydraulic jack force on the track-adjusting bearing block. Crawler drive: Independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor propelling a driving tumbler through a planetary gear box. Hydraulic motor and gear box are built into the crawler side frame within the shoe width. Crawler brakes: Spring-set, hydraulically released parking brakes...

Open the catalog to page 5
CKS600 - 6

GENERAL DIMENSIONS 4,360 (Crawler Extended) This catalog may contain photographs of machines with specications, attachments and optional equipment. Limit of Hook Lifting Ball hook

Open the catalog to page 6
CKS600 - 7

Crane Boom Arrangements

Open the catalog to page 7
CKS600 - 8

WORKING RANGES Crane Boom Radius from center of rotation (m) Height above ground (m)

Open the catalog to page 8
CKS600 - 9

Height above ground (m) Radius from center of rotation (m)

Open the catalog to page 9
CKS600 - 10

WORKING RANGES Radius from center of rotation (m) Height above ground (m)

Open the catalog to page 10
CKS600 - 11

SUPPLEMENTAL DATA · Ratings according to EN13000. · Operating radius is the horizontal distance from centerline of Rotation to a vertical line through the center of gravity of the load. · Deduct weight of hook block (s), slings and all other load handling accessories from main boom ratings shown. (Fixed jib lifting) · The total load that can be lifted is the value for weight of jib hook block, slings, and all other load handling accessories deducted from xed jib ratings shown. · The availability of xed jib mounting - On crane boom : Range 30.5 m to 42.7 m. But 18.3 m jib is not allowed to...

Open the catalog to page 11
CKS600 - 12

LIFTING CAPACITIES Crane Boom Lifting Capacities Counterweight: 11.0 t Unit: metric ton Working radius (m) Crane Boom Lifting Capacities Counterweight: 13.0 t Unit: metric ton Note: Ratings according to EN13000. Ratings shown in are determined by the strength of the boom or other structual components. Weight of hooks, hook blocks, slings and other lifting devices are a part of the total load. Their total weight must be subtracted from the rated load to obtain the weight that can be lifted. Lifting capacities may vary depending on hook used or with/without auxiliary sheave. Please refer...

Open the catalog to page 12
CKS600 - 13

Fixed Jib Lifting Capacities (Without Main Hook Block) (Jib Offset Angle : 10°) Boom length (m) Fixed Jib Lifting Capacities (Without Main Hook Block) (Jib Offset Angle : 30°) Boom length (m) Boom length (m) Jib length (m) Counterweight: 13.0 t Unit: metric ton Boom length (m) Jib length (m) Note: Ratings according to EN13000. Ratings shown in are determined by the strength of the boom or other structual components. Weight of hooks, hook blocks, slings and other lifting devices are a part of the total load. Their total weight must be subtracted from the rated load to obtain the weight that...

Open the catalog to page 13
CKS600 - 14

SUPPLEMENTAL DATA FOR CLAMSHELL RATING CHART · Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. · Deduct weight of bucket, slings and all other load handling accessories from main boom ratings shown. · Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. The operator, therefore, has the responsibility to...

Open the catalog to page 14
CKS600 - 15

LIFTING CAPACITIES Clamshell Rating Charts Crane Boom Capacities Load radius (m) Counterweight: 13.0 t Crawler Fully Extended Unit: metric ton Boom length (m) Note: Please refer rated chart in operator’s cabin.

Open the catalog to page 15
CKS600 - 16

SUPPLEMENTAL DATA FOR BARGE RATING CHART · The boom should be erected over the front of the crawlers, not laterally. · Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. · Ratings inside of boxes materials. · Deduct weight of hook block (s), slings and all other load handling accessories from main boom ratings shown. · The minimum rated load is 1.0 (ton). · Condition of barge stability this rating chart were determined under the condition below. The stability of barge shall meet below condition. During...

Open the catalog to page 16
CKS600 - 17

LIFTING CAPACITIES Counterweight: 13.0 t Crawler Fully Extended Barge Raiting Chart Crane Boom Lifting Capacities Load radius (m) Unit: metric tons Note: Ratings according to japanese construction codes for mobile cranes and japanese safety ordinance on cranes, etc. Ratings shown in are determined by the strength of the boom or other structual components. Lifting capacities may vary depending on hook used or with/without auxiliary sheave. Please refer rated chart in operator’s cabin.

Open the catalog to page 17
CKS600 - 18

TRANSPORTATION PLAN Base Machine · Gantry · Crawler · Wire rope (Front / rear / boom hoist) Base Machine · Boom base · Gantry · Crawler · Wire rope (Front / rear / boom hoist) · Without side steps Base Machine · Boom base · Gantry · Crawler · Wire rope (Front / rear / boom hoist) · Without side steps Base Machine · Wire rope (Front / rear / boom hoist) · Without side steps Base Machine · Gantry · Wire rope (Front / rear / boom hoist) · Without crawler · Without side steps *1 With the side step on cabin side: 3,170 With the side steps on the both sides: 3,340

Open the catalog to page 18

All Kobelco Cranes Co. catalogs and technical brochures

  1. BMS800spec

    20 Pages

  2. CK1600G-2

    70 Pages

  3. CKE900G-3spec

    24 Pages

  4. BMS1200HD

    24 Pages

  5. CKS800

    24 Pages

  6. TK750G

    16 Pages

  7. 7055

    24 Pages

  8. CKE1350G

    15 Pages

  9. CKE-BME series

    15 Pages

  10. RKE 450

    4 Pages

  11. RK250

    4 Pages

  12. 7120SFS

    28 Pages

  13. BMS1200HD

    24 Pages

  14. SL4500S

    56 Pages

  15. SL4500G

    29 Pages

  16. BMS1000

    20 Pages

  17. CKS2500

    88 Pages

  18. CKS1350

    48 Pages

  19. CKS1100

    28 Pages

  20. CKS900

    28 Pages

  21. CK1200G

    24 Pages

  22. CKE2500G

    84 Pages

  23. BME800G

    20 Pages

  24. CKE1100G

    24 Pages

  25. CKE900G

    24 Pages

  26. CKE800G

    24 Pages

  27. CKE600G

    20 Pages

  28. MK500

    3 Pages

  29. TK Series

    8 Pages

  30. CK series

    14 Pages

  31. SL series

    12 Pages

  32. CKGS series

    14 Pages