CKE600G
20Pages

{{requestButtons}}

Catalog excerpts

CKE600G - 1

Hydraulic Crawler Crane Model : CKE600G Max. Lifting Capacity : 60 t x 3.0 m * Max. Crane Boom Length : 51.8 m Max. Fixed Jib Combination: 39.6 m + 18.3 m 42.7 m + 12.2 m * c / w = 11.0 t

Open the catalog to page 1
CKE600G - 3

GENERAL DIMENSIONS WORKING RANGES SUPPLEMENTAL DATA LIFTING CAPACITIES SUPPLEMENTAL DATA FOR CLAMSHELL LIFTING CAPACITIES TRANSPORTATION PLAN

Open the catalog to page 3
CKE600G - 4

SPECIFICATIONS Power Plant Model: HINO J08E-UV Type: 4 cycle, water-cooled, vertical in-line 6, direct injection, turbo-charger, intercooler Complies with NRMM (Europe) Stage IIIB and US EPA Interim Tier 4 Displacement: 7.684 liters Rated power: 213 kW/2100 min-1 Max. Torque: 1,017 N·m/1,600 min-1 Cooling System: Water-cooled Starter: 24V-5kW Radiator: Corrugated type core, thermostatically controlled Air cleaner: Dry type with replaceable paper element Throttle: Twist grip type hand throttle, electrically actuated Fuel filter: Replaceable paper element Batteries: Two 12V x 136 Ah/5HR...

Open the catalog to page 4
CKE600G - 5

Lower Structure Steel-welded carbody with axles. Crawler assemblies can be hydraulically extended for wide-track operation or retracted for transportation. Crawler belt tension is maintained by hydraulic jack force on the track-adjusting bearing block. Crawler drive: Independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor propelling a driving tumbler through a planetary gear box. Hydraulic motor and gear box are built into the crawler side frame within the shoe width. Crawler brakes: Spring-set, hydraulically released parking brakes...

Open the catalog to page 5
CKE600G - 6

GENERAL DIMENSIONS 4,360 (Crawler Extended) This catalog may contain photographs of machines with specifications, attachments and optional equipment. Limit of Hook Lifting Ball hook

Open the catalog to page 6
CKE600G - 7

Crane Boom Arrangements 10 BT Boom arrangement Insert Boom Insert Boom with lug B 10 10 20 20 20 30 30 T mark shows the guy line installing position when the fixed jib is used. ※ mark shows the standard boom arrangement which enables each boom length of less than that boom length to be configured. 30 T Crane boom length Remarks Jib Base Jib Top Insert Jib

Open the catalog to page 7
CKE600G - 8

WORKING RANGES Crane Boom Radius from center of rotation (m) Height above ground (m)

Open the catalog to page 8
CKE600G - 9

Height above ground (m) Radius from center of rotation (m)

Open the catalog to page 9
CKE600G - 10

WORKING RANGES Fixed Jib 30° 30° Radius from center of rotation (m) Height above ground (m)

Open the catalog to page 10
CKE600G - 11

SUPPLEMENTAL DATA · Ratings according to EN13000. · perating radius is the horizontal distance from centerline of O Rotation to a vertical line through the center of gravity of the load. · educt weight of hook block (s), slings and all other load D handling accessories from main boom ratings shown. · atings shown are based on freely suspended loads and make R no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. The operator, therefore, has the...

Open the catalog to page 11
CKE600G - 12

LIFTING CAPACITIES Crane Boom Lifting Capacities Counterweight: 11.0 t Unit: metric ton Boom Length Working (m) radius (m) Crane Boom Lifting Capacities Counterweight: 13.0 t Unit: metric ton Boom Length Working (m) radius (m) Note: Ratings according to EN13000. Ratings shown in are determined by the strength of the boom or other structual components. Weight of hooks, hook blocks, slings and other lifting devices are a part of the total load. Their total weight must be subtracted from the rated load to obtain the weight that can be lifted. Lifting capacities may vary depending on hook used...

Open the catalog to page 12
CKE600G - 13

Fixed Jib Lifting Capacities (Without Main Hook Block) (Jib Offset Angle : 10°) Boom length (m) Fixed Jib Lifting Capacities (Without Main Hook Block) (Jib Offset Angle : 30°) Boom length (m) Boom length (m) Jib length (m) Counterweight: 13.0 t Unit: metric ton Boom length (m) Jib length (m) Note: Ratings according to EN13000. Ratings shown in are determined by the strength of the boom or other structual components. Weight of hooks, hook blocks, slings and other lifting devices are a part of the total load. Their total weight must be subtracted from the rated load to obtain the weight that...

Open the catalog to page 13
CKE600G - 14

SUPPLEMENTAL DATA FOR CLAMSHELL RATING CHART · perating radius is the horizontal distance from centerline of O rotation to a vertical line through the center of gravity of the load. · educt weight of bucket, slings and all other load handling D accessories from main boom ratings shown. · atings shown are based on freely suspended loads and make R no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. The operator, therefore, has the responsibility...

Open the catalog to page 14
CKE600G - 15

LIFTING CAPACITIES Clamshell Rating Charts Crane Boom Capacities Load radius (m) Counterweight: 13.0 t Crawler Fully Extended Unit: metric ton Boom length (m) Note: Please refer rated chart in operator’s cabin.

Open the catalog to page 15
CKE600G - 16

Base Machine · Boom base · Gantry · Crawler · Wire rope (Front / boom hoist) Base Machine · Boom base · Wire rope (Front / boom) Base Machine · Gantry · Wire rope (Front / boom / boom drum) · Without crawler Base Machine · Gantry · Crawler · Wire rope (Front / rear / boom hoist)

Open the catalog to page 16
CKE600G - 18

PARTS AND ATTACHMENTS Jib Tip Weight: 145 kg Base Machine Boom base, Gantry, Crawler, Wire rope (Front/boom hoist) Weight: 31,640 kg Width: 2,990 mm Boom Base Weight: 125 kg Jib Strut Weight: 190 kg 2,990 3,620 Crawler Weight: 5,410 kg

Open the catalog to page 18
CKE600G - 19

Auxiliary Sheave Weight: 140 kg Boom Base Weight: 980 kg Upper Spreader Weight: 280 kg 3.0 m Boom Insert Weight: 255 kg Lower Spreader Weight: 200 kg 6.1 m Boom Insert with Lug Weight: 445 kg 1,500 9.1 m Boom Insert Weight: 615 kg 6.1 m Boom Insert Weight: 430 kg 9.1 m Boom Insert with Lug Weight: 630 kg Ball Hook Weight: 160 kg 650

Open the catalog to page 19
CKE600G - 20

Note: This catalog may contain photographs of machines with specifications, attachments and optional equipment not certified for operation in your country. Please consult KOBELCO for those items you may require. Due to our policy of continual product improvements all designs and specifications are subject to change without advance notice. Copyright by KOBELCO CRANES CO., LTD. No part of this catalog may be reproduced in any manner without notice. Inquiries To : 17-1, Higashigotanda 2-chome, Shinagawa-ku,Tokyo 141-8626 JAPAN Tel: +81-3-5789-2130 Fax: +81-3-5789-3372 KOBELCO is the corporate...

Open the catalog to page 20

All Kobelco Cranes Co. catalogs and technical brochures

  1. BMS800spec

    20 Pages

  2. CK1600G-2

    70 Pages

  3. CKE900G-3spec

    24 Pages

  4. BMS1200HD

    24 Pages

  5. CKS800

    24 Pages

  6. TK750G

    16 Pages

  7. 7055

    24 Pages

  8. CKE1350G

    15 Pages

  9. CKE-BME series

    15 Pages

  10. RKE 450

    4 Pages

  11. RK250

    4 Pages

  12. 7120SFS

    28 Pages

  13. BMS1200HD

    24 Pages

  14. SL4500S

    56 Pages

  15. SL4500G

    29 Pages

  16. BMS1000

    20 Pages

  17. CKS2500

    88 Pages

  18. CKS1350

    48 Pages

  19. CKS1100

    28 Pages

  20. CKS900

    28 Pages

  21. CKS600

    24 Pages

  22. CK1200G

    24 Pages

  23. CKE2500G

    84 Pages

  24. BME800G

    20 Pages

  25. CKE1100G

    24 Pages

  26. CKE900G

    24 Pages

  27. CKE800G

    24 Pages

  28. MK500

    3 Pages

  29. TK Series

    8 Pages

  30. CK series

    14 Pages

  31. SL series

    12 Pages

  32. CKGS series

    14 Pages