Max. Lifting Capacity : 160 US Tons Max. Lifting Capacity - Luffing: 79,000 lbs Max. Crane Boom Length : 250 ft Max. Crane Boom Length : 157 ft Max. Fixed Jib Combination : 200 ft + 100 ft Max. Luffing Jib Length : 175 ft

2 SPECIFICATIONS 6 G-MODE 7 LMI 8 WINCH PERFORMANCE 9 GENERAL DIMENSIONS 10 DIMENSIONS & WEIGHT 13 TRANSPORTATION PLAN 15 SELF ASSEMBLY PROCEDURE 16 COUNTERWEIGHT SELF-REMOVAL DEVICE 17 BOOM & JIB ARRANGEMENTS 18 WORKING RANGES 21 LIFTING CAPACITY 31 CLAMSHELL DATA 34 BARGE DATA LUFFING BOOM/JIB 39 SPECIFICATIONS 40 GENERAL DIMENSIONS 42 DIMENSIONS & WEIGHT 44 BOOM & JIB ARRANGEMENTS 46 WORKING RANGES 49 LIFTING CAPACITY

Type Maximum li ft capacity Basic boom length Maximum boom length Basic boom & jib length Maximum boom & jib length Working weight Ground bearing pressure Gradeability Crawler mounted, Lattice boom, Hydraulic controlled 320,000 lbs (145,200 kg) @ 15’ operating radius (50’ boom) 50’ (15.2 m) 250’ (76.2 m) 90’ + 40’ (27.4 m + 12.2 m) 200’ + 100’ (61.0 m + 30.5 m) Approx. 308,725 lbs (140,000 kg) Approx. 11.8 psi (81.7 kPa) 30% Calculations to detennine working weight, ground bearing pressure, and gradeability include the weight of the upper and lower works of the crane, counterweights, and carbody...

SPECIFICATIONS Hydraulic pumps: Load hoist and propel 2 piston pumps, max flow rate 69.5 US gal/min x 2 (263 l/min x 2) Boom hoist 1 piston pump, max flow rate 68.2 US gal/min (258 l/min) Swing 1 piston pump, max flow rate 47.6 US gal/min (180 l/min) Control system and auxiliary 2 Gear pumps, max flow rate 16 US gal/min + 11 US gal (61 l/min + 40 l/min) Self Lifting Device - Standard Equipment Counterweight and Carbody weight Counterweight Base 1 x 22,050 (10,000 kg) Counterweight (R) 5 x 9,925 (4,500 kg) Counterweight (L) 5 x 9,925 (4,500 kg) Total Counterweight 121,300 (55,000 kg) Carbody weight...

Line pull: Max. line pull (single line) - 52,500 lbf (233 kN) Rated line pull - 29,500 lbf (132 kN) Lower Machinery CK1600G-2 SPECIFICATIONS Front drum: Front and rear drums for load hoist powered by hydraulic variable plunger motors, driven through planetary reducers. Negative brake A spring-set, hydraulically released multiple disk brake is mounted on the hoist motor and operated through a counter-balance valve. Drum lock External ratchet for locking drum Drums: Front drum -666 mm P.C.D. x 672 mm Lg., grooved for 26 mm wire rope. Rope capacity is 902’ (275 m) working length and 1,148’ (350...

Maximum jib length Basic jib length Jib base section Jib tip section Jib insert Crane Attachments Boom: The welded lattice construction uses tubular, high-tension steel chords with pin connections between sections. Maximum boom length 250’ (76.2 m) Basic boom length 50’ (15.2 m) Boom base section 25’ (7.6 m) Boom tip section (with Taper insert boom) 25’ (7.6 m) Boom insert (optional): Optional boom inserts are available to provide extension capabilities. They are robotic welded, laser aligned, lattice constructed with tubular, high-tension steel chords and pin connections. Boom insert 10’ (3.1...

SPECIFICATIONS G-Mode The G-modes are a standard exclusive energy and fuel saving system, with up to 30% in fuel savings. The G-Mode eliminates needless operations and engine functions allowing for reduced fuel consumption by using three basic modes that are all operator selectable. Auto Idling Stop Mode (AIS): An Industry First The AIS mode can conserve fuel by stopping the engine, with an operator prompt, after 10 seconds of idling time. Restarting the engine is simple by just twisting the throttle. Rope hosting speed An Industry First G-Winch Mode: The G-winch mode can produce maximum winch...

SPECIFICATIONS Load Moment Indicator (LMI) The Kobelco designed 12” touch panel screen with sunshade and screen protector is an industry first. This intuitive and easy to understand new touch screen monitor gives the operator a full display of essential data. Universal pictograms are used providing easy visual recognition, making this new technology easy to read and understand the information. This new monitor includes: Hook Height, Engine Speed, Display Lamp of standard functions, Gauges, Over-Swing Prevention Device, Maximum Load Radius, Switches, and Error Messages. Load charts include standard,...

Winch Performance Data Note: Line speed and line pull based on Hino P11C-VN at 1,850 rpm. Line speed and line pull based on single line. Max. line pull is based on referential performance, not wire rope strength. Front & Rear Drum Wire Rope Diameter = See spec in chart below Rated Line Pull = 29,500 lbf (132 kN) Maximum Line Pull = 52,500 lbf (233 kN) Total Storage Capacity = 1,153 ft (351.3 m) Line speed (ft/min) storage only Third Drum (for Load hoist) Wire Rope Diameter = See spec in chart below Rated Line Pull = 29,500 lbf (132 kN) Maximum Line Pull = 50,000 lbf (222 kN) Total Storage Capacity...

General Dimensions

SPECIFICATIONS Dimensions and Weight Base Machine - 3 Weight: 64,480 lbs (29,250 kg) Wire ropes (front, rear, and boom hoist) Base Machine - 2 Weight: 70,715 lbs (32,075 kg) Gantry, wire ropes (front, rear, and boom hoist) Base Machine - 1 Weight: 84,815 lbs (38,470 kg) Boom base, gantry, crane backstop, self removal unit, and wire ropes (front, rear, and boom hoist) Counterweight Self-Removal Cylinder Weight: 3,380 lbs (1,535 kg) * - 10’5” wide with Catwalks on cab side only. 11’ wide with Catwalks on both sides.

SPECIFICATIONS Dimensions and Weight Carbody Weight Weight: 11,905 lbs (5,400 kg) Counterweight Base Weight: 22,050 lbs (10,000 kg) Auxiliary Sheave Weight: 665 lbs (300 kg) Boom Base (with backstop) Weight: 9,400 lbs (4,265 kg) 6’ 7” (2,000) 10 ft (3.0 m) Insert Boom Weight: 1,115 lbs (505 kg) 20 ft (6.1 m) Insert Boom Weight: 1,810 lbs (820 kg) 10’ 5” (3,180) 40 ft (12.2 m) Insert Boom Weight: 3,190 lbs (1,445 kg) Taper Insert Boom Weigh