BMS800spec
20Pages

Hydraulic Crawler Crane Model : BMS800 Max. Lifting Capacity: 80 t x 3.6 m Max. Crane Boom Length: 54.9 m

Power Plant Model: HINO P11C-VH Type: 4 cycle, water-cooled, vertical in-line 6, direct injection, turbo-charger, intercooler Displacement: 10,520 liters Rated power: 271 kW / 1,850 min-1 Max. Torque: 1,470 N-m / 1,400 min-1 Cooling System: Water-cooled Starter: 24 V- 6 kW Radiator: Corrugated type core, thermostatically controlled Air cleaner: Dry type with replaceable paper element Throttle: Twist grip type hand throttle, electrically actuated Fuel filter: Replaceable paper element Batteries: Two 12 V x 136 Ah/5HR capacity batteries, series connected Fuel tank capacity: 400 liters...

Lower Structure Steel-welded carbody with axles. Crawler assemblies can be hydraulically extended for wide-track operation or retracted for transportation. Crawler belt tension is maintained by hydraulic jack force on the track-adjusting bearing block. Crawler drive: Independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor propelling a driving tumbler through a planetary gear box. Hydraulic motor and gear box are built into the crawler side frame within the shoe width. Crawler brakes: Spring-set, hydraulically released parking brakes...

may contain photographs of machines with specifications, attachments and optional equipment.

Boom arrangement ^ i ndicates the most flexible combination of insert luffing booms, which can be modified to form all shorter luffing boom arrangements.

WORKING RANGES Crane Boom Radius from center of rotation (m) Center of rotation 1.1 m Height above ground (m)

• Ratings according to EN13000. •Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. •Deduct weight of hook block (s), slings and all other load handling accessories from main boom ratings shown. •Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. The operator, therefore, has the responsibility to judge...

Note: Ratings according to EN13000. Ratings shown in I I are determined by the strength of the boom or other structural components. Lifting capacities may vary depending on hook used or with/without auxiliary sheave. Please refer rated chart in operator's cabin.

• Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. •Deduct weight of bucket, slings and all other load handling accessories from main boom ratings shown. •Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. The operator, therefore, has the responsibility to judge the existing conditions and reduce...

Counterweight: 16.39 t Unit: metric ton Note: Please refer rated chart in operator's cabin.

Operation of this equipment in excess of rated loads or disregard of instruction voids the warranty.

Unit: metric ton Boom llength Load l(m) Note: Ratings according to EN13000. Ratings shown in I I are determined by the strength of the boom or other structural components. Lifting capacities may vary depending on hook used or with/without auxiliary sheave. Please refer rated chart in operator's cabin.

• Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. • Deduct weight of hook block(s), slings and all other load handling accessories from main boom ratings shown. • Condition of barge stability this rating chart were determined under the condition below. The stability of barge shall meet below condition. During operation the machinery static inclination against horizontal level. (A) Both sides (right & left) of machine Maximum inclination shall be within 1.5 Degrees (B) Front & backward of macine Maximum...

Counterweight: 25.4 t Unit: metric tons Note: Ratings according to japanese construction codes for mobile cranes and japanese safety ordinance on cranes, etc. Ratings shown in I I are determined by the strength of the boom or other structual components. Lifting capacities may vary depending on hook used or with/without auxiliary sheave. Please refer rated chart in operator's cabin.

Base Machine • Boom base • Gantry • Crawler • Wire rope (Front / rear / boom hoist) Base Machine • Gantry • Crawler • Wire rope (Front / rear / boom hoist) Base Machine • Boom base • Gantry • Wire rope (Front / rear / boom hoist) Base Machine • Gantry • Wire rope (Front / rear / boom hoist) • Without crawler

PARTS AND ATTACHMENTS Crawler Weight: 7,180 kg Base Machine Boom base, Gantry, Crawler Wire rope (Front/rear/boom hoist), Weight: 48,630 kg Width: 3,500 mm

3.0 m Boom Insert Weight: 310 kg Auxiliary Sheave Weight: 340 kg Upper Spreader Weight: 280 kg 6.1 m Boom Insert Weight: 522 kg 6.1 m Boom Insert with Lug Weight: 545 kg Ball Hook Weight: 300 kg 9.1 m Boom Insert Weight: 745 kg 9.1 m Boom Insert with Lug Weight: 765 kg

Note: This catalog may contain photographs of machines with specifications, attachments and optional equipment not certified for operation in your country. Please consult KOBELCO for those items you may require. Due to our policy of continual product improvements all designs and specifications are subject to change without advance notice. Copyright by KOBELCO CRANES CO., LTD. No part of this catalog may be reproduced in any manner without notice. Inquiries To : 17-1, Higashigotanda 2-chome, Shinagawa-ku,Tokyo 141-8626 JAPAN Tel: +81-3-5789-2130 Fax: +81-3-5789-3372 KOBELCO is the corporate...