video corpo

BMS1000
1 /20Pages

BMS1000

BMS1000
1 /20Pages

Catalog excerpts

BMS1000-1

Hydraulic Crawler Crane Model : BMS1000 Max. Lifting Capacity: 100 t x 3.8 m Max. Crane Boom Length: 62.6 m

 Open the catalog to page 1
BMS1000-3

SPECIFICATIONS GENERAL DIMENSIONS BOOM AND JIB ARRANGEMENTS WORKING RANGES SUPPLEMENTAL DATA LIFTING CAPACITIES SUPPLEMENTAL DATA FOR CLAMSHELL LIFTING CAPACITIES SUPPLEMENTAL DATA FOR REDUCED WEIGHTS LIFTING CAPACITIES SUPPLEMENTAL DATA FOR BARGE LIFTING CAPACITIES TRANSPORTATION PLAN PARTS AND ATTACHMENTS 2

 Open the catalog to page 3
BMS1000-4

SPECIFICATIONS Power Plant Model: HINO P11C-VH Type: 4 cycle, water-cooled, vertical in-line 6, direct injection, turbo-charger, intercooler. Displacement: 10.520 liters Rated power: 271 kW / 1,850 min-1 Max. Torque: 1,470 N·m / 1,400 min-1 Cooling System: Water-cooled Starter: 24 V- 6 kw Radiator: Corrugated type core, thermostatically controlled Air cleaner: Dry type with replaceable paper element Throttle: Twist grip type hand throttle, electrically actuated Fuel lter: Replaceable paper element Batteries: Two 12 V x 136 Ah/5HR capacity batteries, series connected Fuel tank capacity: 400 liters...

 Open the catalog to page 4
BMS1000-5

Lower Structure Steel-welded carbody with axles. Crawler assemblies can be hydraulically extended for wide-track operation or retracted for transportation. Crawler belt tension is maintained by hydraulic jack force on the track-adjusting bearing block. Carbodyweight: 14.6 ton Crawler drive: Independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor propelling a driving tumbler through a planetary gear box. Hydraulic motor and gear box are built into the crawler side frame within the shoe width. Crawler brakes: Spring-set, hydraulically released...

 Open the catalog to page 5
BMS1000-6

GENERAL DIMENSIONS (CRAWLER RETRACTED) This catalog may contain photographs of machines with specications, attachments and optional equipment. Limit of Hook Lifting Ball hook

 Open the catalog to page 6
BMS1000-7

Crane Boom Arrangements % mark shows the standard boom arrangement which enables each boom length of less than that boom length to be configured.

 Open the catalog to page 7
BMS1000-8

WORKING RANGES Crane Boom Radius from center of rotation (m) Height above ground (m)

 Open the catalog to page 8
BMS1000-9

SUPPLEMENTAL DATA · Ratings according to japanese construction codes for mobile cranes. (Crane boom lifting) · The total load that can be lifted is the value for weight of hook · Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. · Deduct weight of hook block(s), slings and all other load handling accessories from main boom ratings shown. · Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level, operating speeds or...

 Open the catalog to page 9
BMS1000-10

LIFTING CAPACITIES Counterweight: 37.1 t Carbody Weight: 14.6 t Crane Boom Lifting Capacities Unit: metric ton Working radius (m) Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the boom or other structural components. Refer to notes P8. Lifting capacities may vary depending on hook used or with/without auxiliary sheave. Please refer rated chart in operator’s cabin.

 Open the catalog to page 10
BMS1000-11

SUPPLEMENTAL DATA FOR CLAMSHELL RATING CHART · Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. · Deduct weight of bucket, slings and all other load handling accessories from main boom ratings shown. · Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. The operator, therefore, has the responsibility to judge...

 Open the catalog to page 11
BMS1000-12

LIFTING CAPACITIES Clamshell Rating Charts Crane Boom Capacities Load radius (m) Note: Please refer rated chart in operator’s cabin. Counterweight: 37.1 t Carbody Weight: 14.6 t Unit: metric ton

 Open the catalog to page 12
BMS1000-13

SUPPLEMENTAL DATA FOR REDUCED WEIGHTS RATING CHART · Ratings according to japanese construction codes for mobile cranes. · Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. · Deduct weight of hook block(s), slings and all other load handling accessories from main boom ratings shown. · Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level, operating speeds or any other condition that could be detrimental to the safe...

 Open the catalog to page 13
BMS1000-14

LIFTING CAPACITIES Reduced Weights Rating Charts Crane Boom Lifting Capacities Load radius (m) Counterweight: 26.8 t Without Carbody Weight Unit: metric ton Note: Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc. Ratings shown in are determined by the strength of the boom or other structural components. Lifting capacities may vary depending on hook used or with/without auxiliary sheave. Please refer rated chart in operator’s cabin.

 Open the catalog to page 14
BMS1000-15

SUPPLEMENTAL DATA FOR BARGE RATING CHART · Operating radius is the horizontal distance from centerline of · The boom should be erected over the front of the crawlers, not rotation to a vertical line through the center of gravity of the load. laterally. · Ratings inside of boxes · Deduct weight of hook block (s), slings and all other load handling accessories from main boom ratings shown. materials. · The minimum rated load is 1.5 (ton). · Condition of barge stability this rating chart were determined · Crawler frames must be fully extended for all crane operations. under the condition below....

 Open the catalog to page 15
BMS1000-16

LIFTING CAPACITIES Counterweight: 37.1 t Carbody Weight: 14.6 t Crawler Fully Extended Unit: metric tons Barge Rating Chart Crane Boom Lifting Capacities Load radius (m) Note: Ratings according to japanese construction codes for mobile cranes and japanese safety ordinance on cranes, etc. Ratings shown in are determined by the strength of the boom or other structual components. Lifting capacities may vary depending on hook used or with/without auxiliary sheave. Please refer rated chart in operator’s cabin.

 Open the catalog to page 16

All Kobelco Cranes Co., Ltd. catalogs and technical brochures

  1. SK10SR

    8  Pages

  2. BMS800spec

    20  Pages

  3. CKE900G-3spec

    24  Pages

  4. CKS800

    24  Pages

  5. TK750G

    16  Pages

  6. 7055

    24  Pages

  7. CKE1350G

    15  Pages

  8. CKE-BME series

    15  Pages

  9. RKE 450

    4  Pages

  10. RK250

    4  Pages

  11. 7120SFS

    28  Pages

  12. BMS1200HD

    24  Pages

  13. SL4500S

    56  Pages

  14. SL4500G

    29  Pages

  15. CKS2500

    88  Pages

  16. CKS1350

    48  Pages

  17. CKS1100

    28  Pages

  18. CKS900

    28  Pages

  19. CKS600

    24  Pages

  20. CKE2500G

    84  Pages

  21. BME800G

    20  Pages

  22. CKE1100G

    24  Pages

  23. CKE900G

    24  Pages

  24. CKE800G

    24  Pages

  25. CKE600G

    20  Pages

  26. MK500

    3  Pages

  27. TK Series

    8  Pages

  28. CK series

    14  Pages

  29. SL series

    12  Pages

  30. CKGS series

    14  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.