CHIP FUSE チップヒューズ 耐パルス Chip Current Fuses (Anti Pulse) Protective coating ④ 錫めっき Sn plating Fuse element ⑤ 銅/ニッケルめっき Cu/Ni plating Inner electrode ⑥ セラミック Ceramic substrate 外装色黒 Coating colorBlack 小 型、軽量の二次回路用チップ電流ヒューズです。 耐 パルス特性に優れています。 独 自の構造、製法により溶断特性が安定しています。 占 有面積を小さくできます。 内部抵抗値が極めて低く電圧降下、 消費電力を小さ くできます。 小 型電子機器の回路ブロック過電流保護に適しています。 リ フロー、フローはんだ付けに対応します。 欧 州RoHS対応品です。 S mall and light chip current fuses for the secondary circuit. E xcellent in anti-pulse characteristics. O riginal construction and manufacturing method stabilize fusing characteristics. A ble to reduce an occupied area. L ow power consumption and less voltage dropping due to exceedingly low internal resistance. S uitable for overcurrent protection of circuit block in small electronic devices. S uitable for both flow and reflow solderings. P roducts meet EU-RoHS requirements 形名 Type Inch Size Code TF16AT 0603 ■品名構成 Type Designation 例 Example TF 溶断特性 Fusing Characteristics 定格電流 Rated Current 端子表面材質 Terminal Surface Material 二次加工 Taping TD:4mm pitch punch paper BK:Bulk 環境負荷物質含有についてEU-RoHS以外の物質に対するご要求がある場合には お問合せください。 テーピングの詳細については巻末のAPPENDIX Cを参照してください。 Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS. For further information on taping, please refer to APPENDIX C on the back pages. ■取得規格 Approvals Awarded UL248.14認定 File No. E131375 c CSA C22.2 No. 248.14認定 File No. E131375 -UL ■用途 Applications ● ● ● ● Notebook personal computers HDDs Cellular-telephones Digital still cameras 定格電流 Rated Current fusing characteristics.
Open the catalog to page 1■周囲温度による定格電流の軽減 Rated Current Derating Percent rated current 定 常電流が繰り返しパルスの場合には、定常電流波形のピーク値を 定常電流値とします。 ● 定常ディレーティング 7 0℃以上の周囲温度で使用する場合には、温度補正が必要となりま すので、右図のディレーティング係数を考慮ください。 ● Normal derating N ormal derating of this product should be 0.75max. as standards. ● Temperature Derating R ated Current needs to be derated if used at an ambient temperature of 70℃ or more. Refer to the derating coefficient on the right figure. ● Stationary current R egard the peak of stationary current waveform as stationary current value when the stationary current is repeated pulse. ● 溶断時間 Fusing Timesec...
Open the catalog to page 2