Shock Absorber Testing System KNR’s high performance Shock Absorber Testing System enables the user to test damper and shock absorber under various speed ranges. Especially according to the test characteristics such as performance or durability test, the system components are different. For the performance test, the test performs three cycles in a certain speed range and analyze the specimen’s performance with the data and for the durability test, the continuous test is possible under a certain speed range. Also, the shock absorber testing system requires high speed and stable movement of the actuator so that KNR’s Intima series which is a hydrostatic bearing type is used and high speed type frame gives more stable test conditions. Moreover, upon request of the user, a chamber for the temperature and humidity can be installed and acceleration and a temperature of the noise specimen can also be measured by adding additional senso

Sabio-D Wizard KNR provides Sabio-D Wizard control software which is dedicated for the shock absorber test. Sabio-D wizard enables the test easier using each step to input each test condition. Step 1 is a scheduler which enables the user to save and call the list of the test and step 2 sets the limit feature to stop the system under abnormal conditions and step 3 operates the actuator manually and has a zero setting feature for sensor signal for the load and displacement. In step 4, the user can save the data and start or stop the test and monitor the data through the right side monitor. Data...

The test data can be analyzed by a post-processing software and print out the test data using various graphs such as time-displacement graph, damping force-displacement graph, damping force-velocity graph, and damping force-temperature graph.