Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. KNR system
  3. Electric Power Steering Dynamic Fatigue Testing System

Electric Power Steering Dynamic Fatigue Testing System

Electric Power Steering Dynamic Fatigue Testing System
1 / 2 PagesView full catalog

Electric Power Steering Dynamic Fatigue Testing System

Product catalog summary
Overview: The Electric Power Steering (EPS) Fatigue Testing System is designed to perform dynamic load fatigue tests and torsional impact tests on steering systems using high-performance hydraulic servo actuators.
System Components:
  • Servo System: Includes a one-channel hydraulic servo actuator, CAN network for EPS control, a fixture for C-EPS, torque cell fixture, and a base plate.
  • Hydraulic Power Requirements: Requires 21Mpa of pressure and a 180LPM Hydraulic Power Unit (HPU).
Features and Configurations:
  • Hydraulic servo system for precise control.
  • Load and strain measurement channels for accurate data collection.
  • CAN network module for seamless EPS control integration.
  • Environmental chamber to simulate various testing conditions.
Control and Software: The system is equipped with the Deneb DE controller and Sabio-D software, ensuring compliance with all relevant test standards set by automakers and EPS manufacturers.
See more

Catalog excerpts

Electric Power Steering Dynamic Fatigue Testing System-1

Electric Power Steering Fatigue Testing System The Electric Power Steering Fatigue Testing System uses high performance hydraulic servo actuators and it performs dynamic load fatigue test and torsional impact test from the wheel.

 Open the catalog to page 1
Electric Power Steering Dynamic Fatigue Testing System-2

This system consists of a Servo system, which includes one channel hydraulic servo actuator, CAN network for EPS control, a fixture to fix C-EPS, torque cell fixture, and a base plate. Also, 21Mpa of pressure and 180LPM of Hydraulic Power Unit (HPU) is necessary. The Electric power steering fatigue testing system uses an easy to use and prominently controllable controller, Deneb DE along with Sabio-D, the software. With this combination, this system satisfies all the test standards of auto makers and EPS manufacturers. General Features and Configurations - Hydraulic servo system - Load, strain...

 Open the catalog to page 2

All KNR system catalogs and technical brochures

  1. Derailment Simulation System
    Derailment Simulation System

    4  Pages

  2. High Speed Wheel / Rail Contact Simulation System
    High Speed Wheel / Rail Contact Simulation System

    6  Pages

  3. 6 DOF Earthquake Simulation System
    6 DOF Earthquake Simulation System

    8  Pages

  4. Motor Environment Durability Testing System
    Motor Environment Durability Testing System

    4  Pages

  5. EVP Durability Testing System
    EVP Durability Testing System

    4  Pages

  6. Service Life Simulation System
    Service Life Simulation System

    4  Pages

  7. Shock Absorber Durability Testing System
    Shock Absorber Durability Testing System

    4  Pages

  8. CV-Joint High AngleTorque Testing System
    CV-Joint High AngleTorque Testing System

    4  Pages

  9. Propeller Shaft Joint Sealing Testing System
    Propeller Shaft Joint Sealing Testing System

    4  Pages

  10. Drive Shaft Simulation System
    Drive Shaft Simulation System

    5  Pages

  11. 6 DOF shake table
    6 DOF shake table

    5  Pages

  12. Servo Valve
    Servo Valve

    8  Pages

  13. 6-DOF Seismic Simulation System
    6-DOF Seismic Simulation System

    8  Pages

  14. Multi Axes Shaking Table
    Multi Axes Shaking Table

    5  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.