Modular Vacuum Systems, controlled Vacuum Chemically-resistant LABOPORT® with Separator, Condenser and Vacuum Controller ■ Simple connection to the line power (power plug) and to the pneumatic system ■ Automatic vacuum control ■ Controlled recovery of solvents, with high-performance condenser (at the pressure side) ■ Collection of particles in the system (at the suction side) ■ Easy to expand or convert The SC vacuum systems are equipped with the LABOPORT-series chemically-resistant diaphragm pump of your choice (refer to the table/overview "modular accessories"). SC systems include a vacuum controller for controlled vacuum processes. There is a wide range of applications for these vacuum systems in laboratories, whenever clean, constant vacuum is required. The heart of the very compact LABOPORT pumps used in the vacuum systems is KNF structured diaphragm. This patented diaphragm was stress-optimized using the finite elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. For laboratory applications, there is a wide variety of vacuum pumps with many different performance levels and various modular system components. The systems listed here are fully assembled at the factory. They can be converted quickly and easily; special tools are not required. Chemically-resistant diaphragm pump of your choice, base plate, separator (suction side), condenser (pressure side), vacuum controller with electrical supply unit, cabling and tubing ready to connect. System3) Delivery Ultimate Operating Motor ~230V/50Hz Pneumatic Weight Dimensions vacuum pressure operating current (A)/ connections (L x W x H) (l/min)1) (mbar abs) (bar g) power P1 (W)2) for tube ID (kg) (mm) Built in pump type SC system comprising vacuum pump, base plate, condenser, separator and a vacuum controller 1) at atm. pressure 2) Motors with other voltages, frequencies on request 3) systems with single head pumps and lower vacuum on request KNF reserves the right to make changes.

Modular Vacuum Systems, controlled Vacuum Dimensions (see table) Pressure side for tube ID 10 Suction side for tube ID 10 High-performance condenser Vacuum controller Diaphragm vacuum pump Electrical supply unit Base plate W Refrigerant connection (e.g. water) for tube ID 8 Coolant valve KNF Neuberger GmbH, Alter Weg 3, D-79112 Freiburg, Tel. ++49(0)7664/5909-0, Fax ++49(0)7664/5909-99, www.knf.de, E-Mail: [email protected] KNF reserves the right to make changes.