Water pressure booster pump PFT AV 1000 230 V-version 400 V-version Functional description: The PFT AV 1000 is a radially priming pressure booster pump. The drive is protected by a casing with a convenient handle. Applications: The pressure booster pump is switched on if the required minimum flow pressure of 2.5 bar is not available on site, or if the machine is supplied with water from a tank. Advantages at a glance: ® high capacity ® casing made from stainless steel ® insensitive to impurities in the used water Technical data Power connection Input power Protection Supply rate Conveying height Liquid temperature Operating pressure allowed Total weight Knauf PFT GmbH & Co. KG P. O. Box 60 97343 Iphofen Germany Phone +49 9323 31-760 Fax +49 93 23 31-770 [email protected] www.pft.eu 230 V, 50 Hz, 1 phase 400 V, 50 Hz, 3 phases 0,6 kW IP X4 max. 80 l/min max. 50 m max. +40° C max. 8 bar 8.5 kg All rights and technical changes reserved. We provide guarantee as far as faultless and proper finishing of our machines is concerned. Figures given in relation to output, equipment and performance are based onexperience and can vary in case of changing circumstances. Furthermore, the instructions of the material/mortar manufacturers must be observed. Alterations, reprints and photomechanical reproductions, even inextracts, require the permission of Knauf PFT GmbH&Co.KG.©Copyright by Knauf PFT Iphofen. Printed in Germany