PFT MINICUT hot wire cutting tool

Product catalog summary

Overview:
The PFT MINICUT is a practical hot wire cutting tool designed for use in the building trade, industry, and design sectors. It is available in two versions, 140mm and 230mm, each with specific features and accessories.

Specifications:

Power Connection: 230V, 50Hz for both models.
Power Supply: 110 W max for 140mm, 230 W for 230mm.
Cutting Cycle: 12 seconds on, 48 seconds off.
Maximum Cutting Temperature: 500°C for both models.
Weight: Approximately 1 kg for 140mm, 0.6 kg for 230mm.

Delivery Contents:

140mm Model: Includes a hot wire cutting tool, 3m power cable, hook, cleaning brush, and operating instructions in a case.
230mm Model: Includes a hot wire cutting tool, 3m power cable, hex driver, cleaning brush, and operating instructions in a case.

Field of Application:
The tool is suitable for cutting boards up to 140mm or 230mm thick. The 230mm model features an electronic power controller for optimal cutting temperature adjustment.

Advantages:

Ready to cut in 10 seconds.
No dust production.
Insulated for safety.
No static charge.
Stainless steel bezel that is easily changeable.

Accessories and Spare Parts:

Bezel for 140mm and 230mm models.
Section-adapter for 230mm model for cutting notches in insulation panels.
Cutting strap (replacement) for 230mm model.

Contact Information:
Knauf PFT GmbH & Co. KG, P.O. Box 60, 97343 Iphofen, Germany. Phone: +49 9323 31-760, Fax: +49 9323 31-770, Email: [email protected], Website: www.pft.eu

Additional Information:
The document emphasizes the importance of following the instructions of material/mortar manufacturers and notes that technical changes are reserved. The PFT MINICUT is part of the PFT CUTMASTER series, offering a cutting height up to 1,350mm and a depth of 310mm, depending on the version.

Catalog excerpts

Hot wire cutting tool PFT MINICUT PFT MINICUT 140 mm in case PFT MINICUT 140 mm in cardboard box PFT MINICUT 230 mm in case The practical hot wire cutting tool is the practical addition to the PFT CUTMASTER with a cutting height up to 1,350 mm and a cutting depth of 310 mm, depending on version. Delivery contents – PFT MINICUT 140 mm: Hot wire cutting tool with approx. 3 m power cable, hook, cleaning brush and operating instructions in case Delivery contents – PFT MINICUT 230 mm: Hot wire cutting tool with approx. 3 m power cable, hex driver, cleaning brush and operating instructions in case Spare parts: Bezel, 140 mm Bezel round, 230 mm Bezel plane, 230 mm Field of application: The powerful device is just perfect for building trade, industry and design. For boards up to a thickness of 140 mm or 230 mm. The PFT MINICUT 230 mm with electronic power controller for optimal adjustment of cutting temperature. Thanks to electronic power controller cutting temperature is continuously adjustable. Advantages at a glance: ® ready to cut in 10 seconds ® no dust ® insulated for your safety ® no statically charging ® bezel made of stainless steel can be changed easily Technical data Description: Power connection: Power supply: While cutting: Weight with cutting edge: approx. 1 kg Knauf PFT GmbH & Co. KG P.O. Box 60 97343 Iphofen Germany Phone +49 9323 31-760 Fax +49 93 23 31-770 [email protected] www.pft.eu Recommended accessories see on back side uu All rights and technical changes reserved. We provide guarantee as far as faultless and proper finishing of our machines is concerned. Figures given in relation to output, equipment and performance are based on experience and can vary in case of changing circumstances. Furthermore, the instructions of the material/mortar manufacturers must be observed. Alterations, reprints and photomechanical reproductions, even in extracts, require the permission of Knauf PFT GmbH & Co.KG. © Copyright by Knauf PFT Iphofen. Printed in Germany

Open the catalog to page 1

NEW Accessories for the practical hot wire cutting tool PFT MINICUT 230 mm PFT Section-adapter Part no. 00 28 55 29 Required accessories: Cutting strap (replacement), 1 m PFT MINICUT 230 mm with section-apapter Free selectable forms, e. g. slot cuttings caused by simple bending of the cutting strap. Functional description: The new PFT section-adapter for hot wire cutting tool PFT MINICUT 230 mm can be used to cut individual notches out of insulation panels. The width and depth of the notches, for example for empty conduit, can be chosen freely because of the flexible cutting strap. Even very...

Open the catalog to page 2

All Knauf PFT GmbH & Co. KG catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list