Electrical pressure switch off with display Part no. 00 42 10 87 Description: The PFT electrical pressure switch off with display is a system which switches the PFT mixing pump or PFT conveying pump automatically on / off as soon as a the mortar pressure falls below or exceeds a certain value. The upper cut-out pressure and the lower start-up pressure can be set individually and therefore adjusted optimally to the application and the hose length. Applications: The PFT pressure switch off can be used wherever a machine isn’t controlled by air. It’s the clever alternative to a remote control cable which can be the case p. e. by casting compounds or by processing adhesive. Advantages at a glance: ® Compatible with all PFT mixing and conveying pumps ® The upper cut-out pressure can be set individually. ® The lower start-up pressure adjusts itself automatically ® but can also be readjusted. ® Suitable for building sites, impact resistant and splash-proof ® plastic casing ® Integrated magnetic foots ® Extremely simple operation ® High-quality spiral cable ® Robust and protected VA-pressure switch with exchangeable ® diaphragm ® Display also readable in sunlight Technical data Pressure range Protection Power supply by remote control outlet: Temperature range Connection PFT – THE FLOW OF PRODUCTIVITY Knauf PFT GmbH & Co. KG P. O. Box 60 97343 Iphofen Germany Phone +49 9323 31-760 Fax +49 93 23 31-770 [email protected] www.pft.eu All rights and technical changes reserved. We provide guarantee as far as faultless and proper finishing of our machines is concerned. Figures given in relation to output, equipment and performance are based onexperience and can vary in case of changing circumstances. Furthermore, the instructions of the material/mortar manufacturers must be observed. Alterations, reprints and photomechanical reproductions, even inextracts, require the permission of Knauf PFT GmbH&Co. KG. ©Copyright by Knauf PFT Iphofen. Printed in Germany