V- V 1> (IDE - Integrated Diamond Eductor) 3 . ■ Up to 50% more productivity-no maintenance down time1 ■ From 10 to 20 times greater mean time between failure ■ Superior edge quality Normally Closed Valve (Actuator and Valve Body) LONG r LIFE STEM & SEAL! HyperTube™ PRO Focusing Tube The superior design of the HyperTube™ PRO is engineered for longer, more uniform wear preventing "focusing tube blow-out”. The HyperTube™ PRO includes an Indexing feature to insure uniform internal abrasive wear. (HyperTube™ PRO Trademark US Patent Pending) Precision Engineered Nozzle Tube Increases Performance Indexing Feature: Before using HyperTube same face as the abrasive feed Rotate 90° clockwise on a regular. scheduled maintenance program IDE™ Head with New Diamond Mounting Improves Alignment & Cutting Performance Focusing Tube COMPLETE IDE® ASSEMBLY The KMT Integral Diamond Eductor consistently demonstrates superior performance and reduced operating cost when compared to competitive brand abrasive cutting heads.

MOUNT ALIGNMENT COMPARISON Mis-aligned Design The KMT diamond orifice is integral to the cutting head and factory aligned for life. The result is up to 50% faster cutting speed and from 10 to 20 times greater mean time between failure. This illustration of a competitive design mount shows that debris as small as a single garnet particle can cause a 0.025” jet stream mis-alignment resulting in premature mixing tube wear and decreased cutting speed and performance. Reduced Operating Cost The integral diamond orifice reduces operating costs with faster cutting, extended focusing tube life and dramatically...