High Pressure Pumps STREAMLINE SL-VI The right solution for every application With the introduction of the new modular STREAMLINE SL-VI series of high pressure pumps for waterjet cutting, KMT Waterjet Systems offers the ideal technology for every requirement – from occasional cutting needs to multi-shift operation. Depending on the application the pump is needed for, customers can choose from different pressure ranges, motorizations and configuration levels. Different configuration levels to cover any demand ■ Pressure Range KMT offers the STREAMLINE SL-VI pump at three pressure levels. The PRO intensifier enables waterjet cutting at 6,200 bar for maximum performance. The model type PLUS operates at a pressure level of 4,100 bar, and the type STD allows for a maximum pressure of 3,800 bar. ■ The STREAMLINE  SL-VI high pressure pump will be available with motor ratings from 15 to 200 HP (11 to 149 kW). The first release of the pump will include a 30 and 50 HP motor for the PLUS and STD intensifier as well as a 60 HP motor for the PRO intensifier – other motor ratings to follow. ■ Unsurpassed productivity Waterjet cutting at 6,200  bar has a few major advantages which are particularly relevant for efficiency where operators need to cut thick and/ or very hard materials. The high operating pressure improves conformality as well as the quality of the cut edge compared to traditional 4,000  bar applications. ■ The different configuration possibilities range from the Stripped model without electrical cabinet, doors and cover for complete integration into the centralized control unit of an entire turnkey system to basic stand-alone machines for occasional cutting needs to fully equipped pumps which enable the most demanding cutting applications in an industrial environment. Depending on the material and its thickness, cutting with 6,200 bar allows operators to increase the cutting speed by up to 50%. In some applications, the increase is even higher. Higher operating pressures improve conformality as well as the quality of the cut edge. In many cases, there is no need for reworking cut edges. Cutting with 6,200 bar significantly reduces the consumption of abrasive. Thanks to the increased cutting speed, more workpieces can be cut in the same time. This leads to lower costs per piece. The high working pressure when piercing and cutting the workpiece reduces the delamination for composite material. THE HEART OF WATERJET CUTTING KMT GmbH • KMT Waterjet Systems Hohe Straße 4-6 ■ 61231 Bad Nauheim ■ Germany Phone: +49-6032-997-0 ■ Fax: +49-6032-997-270 www.kmt-waterjet.com ■ [email protected] KMT Waterjet Systems Inc. 635 West 12th Street ■ Baxter Springs ■ KS 66713 USA Phone: +1-620-856-2151 KMT Machine Tool Ltd. No. 251 Ri Ying Nan Road ■ WaiGaoQiao Free Trade Zone Shanghai, 200131 ■ China Phone: +86-21-5048-4621 08/2015 STREAMLINE SL-VI The Right Solution for Every Application

High Pressure Pumps STREAMLINE SL-VI The right solution for every application With the introduction of the new modular STREAMLINE SL-VI series of high pressure pumps for waterjet cutting, KMT Waterjet Systems offers the ideal technology for every requirement – from occasional cutting needs to multi-shift operation. Depending on the application the pump is needed for, customers can choose from different pressure ranges, motorizations and configuration levels. Different configuration levels to cover any demand ■ Pressure Range KMT offers the STREAMLINE SL-VI pump at three pressure levels. The PRO...

High Pressure Pumps STREAMLINE SL-VI With the new series of STREAMLINE SL-VI high pressure pumps for waterjet cutting, KMT Waterjet Systems optimizes their complete range of high pressure intensifier pumps. Based on four frames in different sizes, the SL-VI series will grant the KMT customers an unprecedented choice of configuration possibilities. And while being based on tried and tested technology, the SL-VI comes up with some considerable improvements compared to the predecessor model. Higher performance at the same motor rating The KMT Waterjet engineers were able to optimize the motor performance...

High Pressure Pumps STREAMLINE SL-VI With the new series of STREAMLINE SL-VI high pressure pumps for waterjet cutting, KMT Waterjet Systems optimizes their complete range of high pressure intensifier pumps. Based on four frames in different sizes, the SL-VI series will grant the KMT customers an unprecedented choice of configuration possibilities. And while being based on tried and tested technology, the SL-VI comes up with some considerable improvements compared to the predecessor model. Higher performance at the same motor rating The KMT Waterjet engineers were able to optimize the motor performance...

High Pressure Pumps STREAMLINE SL-VI With the new series of STREAMLINE SL-VI high pressure pumps for waterjet cutting, KMT Waterjet Systems optimizes their complete range of high pressure intensifier pumps. Based on four frames in different sizes, the SL-VI series will grant the KMT customers an unprecedented choice of configuration possibilities. And while being based on tried and tested technology, the SL-VI comes up with some considerable improvements compared to the predecessor model. Higher performance at the same motor rating The KMT Waterjet engineers were able to optimize the motor performance...

High Pressure Pumps STREAMLINE SL-VI The right solution for every application With the introduction of the new modular STREAMLINE SL-VI series of high pressure pumps for waterjet cutting, KMT Waterjet Systems offers the ideal technology for every requirement – from occasional cutting needs to multi-shift operation. Depending on the application the pump is needed for, customers can choose from different pressure ranges, motorizations and configuration levels. Different configuration levels to cover any demand ■ Pressure Range KMT offers the STREAMLINE SL-VI pump at three pressure levels. The PRO...