KMT Waterjet Cutting Nozzles AUTOLINE® PRO 90,000psi NOZZLE HIGH SPEED, SELF-ALIGNING ABRASIVE CUTTING NOZZLE Independent tests prove the KMT AUTOLINE® Series of Abrasive Cutting Nozzles cut faster and at a lower cost than any other nozzle. The Next Generation of the AUTOLINE® Series, the AUTOLINE® PRO, is designed to provide the ultimate in cutting efficiency at 90,000 PSI/6.200 bar, while maintaining ease of use and exacting performance. KMT IDE® Cutting Nozzles are also available in 60,000psi pressure rating. AUTOLINE® II 60,000psi/4.137bar Pressure Available Proven to be the Best Independent tests have shown that the KMT AUTOLINE® design is the ultimate in efficiency and has the lowest operating cost. Industry Standard 60,000psi/50hp Pump & Single Head Cutting Tests performed by the University of Missouri-Science & Technology showed that the AUTOLINE® design achieved the best overall cutting performance for speed and efficiency. Fast cutting and low abrasive consumption helped it to win the top position. Of course, if you’re more interested in speed than efficiency, the orifice can be replaced with a larger size with just a quarter turn of the insert body. PRO-III 90,000psi/125hp Pump & Dual AUTOLINE® PRO Head Cutting Simple, Self-aligning Components The self-aligning components of the KMT AUTOLINE® PRO provide true, perfect alignment to extend the life of focusing tubes and mixing chambers. Everyone claims alignment, however, only the precision finish of the orifices in the AUTOLINE® series enable true precision alignment---even at pressures up to 90,000 PSI! Focusing tubes last longer and wear evenly in an aligned cutting head. NUMBER OF CUTTING HEADS KMT Waterjet now offers a Cut Calculator APP that compares 90,000psi to 60,000psi cutting. ORIFICE SIZE Increase Productivity

Summary of Features • Wear Insert - Larger and relocated for visibility and easy access. • Same Interior Geometries - High performance cutting with very efficient abrasive usage. • Easy Orifice Change - No tools required. • Weep Hole Indicator - Shows when orifice needs to be tightened further, eliminating over-tightening to protect both the orifice and the nozzle tube. • Re-designed Knob - T-Knob designed for easy focusing tube tightening and dis-assembling. • Angled Abrasive Inlet - Inlet is mounted an angle which allows for a faster abrasive flow. • Easier Hose Attachment - Abrasive feed hose...