500 V HOPPER Abrasive Delivery System Continuous Level Monitoring for an Efficient Production Process Abrasive Flow Monitoring Saves Time and Costs Our 500 V HOPPER precisely monitors the availability of cutting systems, the 500 V HOPPER contributes to the sufficient abrasive closely during the entire cutting process economical use of the entire waterjet cutting system. and pneumatically transfers it to the onboard metering device. This protects your valuable material from damage and saves unnecessary costs and time. Its concept assures process stability, security and a very high degree of reliability. • Screened loading area allows for individual bags to be loaded thorough the screen on top of the bulk hopper. Abrasive Low Level Sensor The 500 V HOPPER provides all features to stabilize the cutting process when connected to a centralized control system. The abrasive delivery system features a normally closed proximity switch sensor which indicates when the abrasive content reaches a low level. This feature provides the capability to integrate the signal into the waterjet • Storage tank holds up to 600 pounds of abrasive. • Low abrasive level sensor---prevents running out of abrasive while cutting. • Air regulator and 2 way valve controls the pressure and on/off capabilities. system controller and notifies the operator when it’s time to refill the abrasive. When used in one or multiple shift operation of automated

KMT Waterjet Systems Inc. 635 West 12th Street Baxter Springs, KS 66713 USA 620-856-2151 • 800-826-9274 Fax: 620-856-5050 [email protected]