Product description LMS E2 The LMS E2 series was developed specifically as alternative for conventional drive systems with tooth belts or ball screws. The LMS E² series is designed for highly dynamic movements of small to medium loads. Owing to their compact and simple design, the linear motor systems of the LMS E² series are both highly suited for price-sensitive applications as well as for very tough environmental conditions. They are also ideally suited for stacked XY- and gantry systems. Areas of application include automation technology, the packaging industry as well as the automotive industry and many others. Owing to its rigid design, the LMS E² series is also highly suited for applications in the printing, textile, food and pharmaceutical industries. Basically, the LMS E² series is used wherever maintenance-free high dynamics are required and where the conditions require robust mechatronics and good pricing. • Encoder system with various output signals, • High speed handling • Food processing • Rigid design • Maximum dynamics • Assembly systems • Absolute linear encoder system optional • Test units • Clean room design optional • Transfer systems • Limit switch

W Stop positions Reference mark Nominal stroke Dimensions: Size Total length L [mm] = S + LT + 2 x (LL + 5) Available nominal strokes S [mm] Technical Data: Size Headquarters Daumegasse 1–3, A-1100 Vienna Telephone: +43 1 641 50 30-0 Fax: +43 1 641 50 30-50 E-mail: [email protected] www.kml-technology.com For all further subsidiaries and contacts, please refer to our website: www.kml-technology.com/en/contact Authorised KML-Part