Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. KM Corporate Srl
  3. KN30

KN30

KN30
1 / 1 PageView full catalog

KN30

Product catalog summary
Overview: The KN30 is a bench crimping unit designed for industrial use, offering a crimping force of 3 tons. It is equipped with centesimal adjustment, a working area lamp, and a reel holder bracket for enhanced functionality.
Specifications:
  • Crimping Force: 3 tons
  • Power Supply: 230 VAC - 50/60 Hz
  • Power Consumption: 1.8 Kw (8A)
  • Noise Level: Less than 80 dB(A)
  • Standard Stroke: 40 mm
  • Lower Dead Center: Minimum 132 mm, Maximum 137 mm
  • Wire Cross-Section: Up to 16 mm² (AWG 5)
  • Cycles per Hour: 5000
  • Weight: 95 kg (110 kg with packing)
  • Dimensions without Coil Holders: 320 x 500 x 750 mm (h)
  • Dimensions with Packing: 800 x 600 x 1040 mm (h)
Features: The machine includes a quick clamping feature for the miniapplicator to reduce changeover times. An optional crimp force monitoring system is available upon request.
Limitations: The machine's specifications are subject to change without notice. It may not process extremely hard or tough wires, even if they fall within the indicated ranges. KM Corporate offers sample production for verification.
Contact Information: For further inquiries, contact KM Corporate at Phone: +39 049 7641230, Fax: +39 049 9344179, Email: [email protected], or visit their website at www.kmcorporate.com.
See more

Catalog excerpts

KN30-1

Corporate Wire Processing Technology Model KN30 is a bench crimping unit with crimping force of 3 tons The machine is serially delivered with centesimal adjustment, lamp for the working area lighting and reel holder bracket. The machine has a feature for quick clamping of the miniapplicator to minimize changeover times. On request, the machine can be equipped with crimp force monitoring. Revolving reel support bracket Crimping force Power supply Power consumption Noise level Standard stroke, mm Lower dead center, mm Wire cross-section Cycles/h Weight, kg Weight with packing Dimensions without coil holders Dimensions with packing Crimping force monitor All data and measures are indicative and can be changed without notice. Certain types of extremely hard, tough wires may not be able to be processed even if written within the indicated ranges. In case of doubt, KM Corporate is willing to produce samples of your wire.

 Open the catalog to page 1

All KM Corporate Srl catalogs and technical brochures

  1. CONTACT ST5
    CONTACT ST5

    1  Page

  2. EXTREME
    EXTREME

    1  Page

  3. KN1110
    KN1110

    1  Page

  4. KN3012
    KN3012

    1  Page

  5. KN3011
    KN3011

    1  Page

  6. KN21
    KN21

    1  Page

  7. scheda_MINI
    scheda_MINI

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.