Phone: +39 049 7641230 - Fax: +39 049 9344179 [email protected] - www.kmcorporate.com Wire Processing Technology Model KN21 is a bench crimping unit with crimping force of 2 tons. The safety guards can be completely opened to allow an easy access to the working area and a simple and fast miniapplicator changeover. The reel holder bracket allows a simple and quick shift of the terminal feeding sense. The standard feature includes the footswitch for the cycle drive, a transparent shock-proof safety guards for a full view of the working area and the lamp for the working area lighting. On request the machine can be equipped with a crimp force monitor system, quick coupling base for clamping of the miniapplicator and a kit for use of pneumatic miniapplicators. Revolving reel support bracket KN 21M Crimping force Power supply Power consumption Noise level Standard stroke, mm Lower dead center, mm Wire cross-section Cycles/h Weight, kg Weight with packing Dimensions without coil holders Dimensions with packing Optional 5000 540 N ( 55 Kg) 640 N (65 Kg) mm 340 x 435 x 710 h mm 800 x 600 x 1040 h Crimping force monitor - Quick base kit - Pneumatic kit All data and measures are indicative and can be changed without notice. Certain types of extremely hard, tough wires may not be able to be processed even if written within the indicated ranges. In case of doubt, KM Corporate is willing to produce samples of your wire.