Phone: +39 049 7641230 - Fax: +39 049 9344179 [email protected] - www.kmcorporate.com Wire Processing Technology Model KM1110 is a bench crimping unit with cast iron structure for reduction of strains under load during the work. Its particular 45° shape is considered the most versatile shape for all adjustments and maintenance works to be carried out on the miniapplicator. This model is serially equipped with centesimal adjustment of the Lower Dead Centre, resettable counter, led lamp for working area lighting and two reel holder brackets for eliminating the need for shifting operations with related time loss during miniapplicator changeover. The transparent shock-proof safety guard guarantees a full view of the working area. Its complete opening allows the replacement and setting of tools in a very easy way and without the removal of any parts. The setting key to reset the machine is situated in the front side of the unit, this allows the operator not to move from his working position. On request, the machine can be equipped with a crimp force monitoring system. KM1110 Crimping force Power supply Power consumption Noise level Lower dead center, mm Wire cross-section Weight with packing Dimensions without coil holders Dimensions with packing Crimping force monitor All data and measures are indicative and can be changed without notice. Certain types of extremely hard, tough wires may not be able to be processed even if written within the indicated ranges. In case of doubt, KM Corporate is willing to produce samples of your wire.