Where safe sealing of water, air, acids, alkalines and hydrocarbons is required at low forces and low temperatures, KLINGER ®KGS is an interesting solution. Suitable for flanges made of plain steel, stainless steel, glassfibre reinforced plastic, PP, PVC, PE and for coated flanges. KLINGER – The worldwide leader in seal technology

KLINGER ®KGS Rubber-Metal-Gasket acc. to DIN EN 1514-1, Form IBC replaces DIN 2690 Application fields Media I water I gas I waste water I chemicals Flanges I plain steel, stainless steel I cast iron I GFK (glassfibre reinforced plastic) I PP/ PVC/ PE I coated flanges Safe sealing of water, air, acids, caustic solutions and hydrocarbons with low forces at temperatures up to max. 200°C. Type KGS, Typ KGS/Guss* I at piping design for gas and water piping I for slightly damaged and not always correct routed pipelines Type KGS/S I at piping design for gas and water piping I at rubber coated flanges...

Elastomere materials in different types Inside vulcanised steel ring KGS and KGS/Guss* I Vulcanised rubber gasket, lenticular shape, rounded edges. I Inside vulcanised steel ring, thereby good absorption of surface pressure. I Outer diameter self-centering to the inner diameter of the screw holes. I The gaskets are made of NR = Vulcanisates of natural rubber (SBR), NBR (Nitril rubber), EPDM (Ethylen-Propylen rubber), CSM/ Hypalon (chlorosul-fonated polyethylene) and FKM = Viton (Fluoro elastomere) every with inside vulcanised steel ring. Example for order: Rubber-Metal-Gasket KLINGER ®KGS made...

Spear tip Elastomere materials in different types Inside vulcanised steel ring I Safe sealing already at lowest tightening torques. I Vulcanised rubber gasket, lenticular shape at the gasket body with integrally molded spear tip at the inside of the gasket, rounded edges. The new shape with "spear tip" offers higher safety against pressurized volumes at the sealing area and corrosion. I The gaskets are made of NR = Vulcanisates of natural rubber (SBR), NBR (Nitril rubber), EPDM (Ethylen-Propylen rubber), CSM/ Hypalon (chlorosul-fonated polyethylene) and FKM = Viton (Fluoro elastomere) every with...

KLINGER Rubber-Metal-Gasket Type KGS, KGS/Guss*, KGS/S ® Material * for cast iron flange dimensions Application field NR = Natural rubber (SBR) for water, closed loop water arrangements, soluted lyes at max. 50 % conc. and max. 80°C Approval of own test facility Chemical resistance Resistant against: I water, seawater, pond water, closed loop water up to 90°C I partly against alkalines, 50% NaOH at 50°C I sufficient resistant against natural lighting, weather and ozone Resistant against: I aliphatic hydrocarbons (mineral oils and greases, diesel fuel, petrol) I many of diluted acids and alkalines...

KLINGER Rubber-Metal-Gasket Type KGS, KGS/Guss*, KGS/S ® Potable water/ waste water. Approved according to KTW D1/D2, 1.3.13 of national health service for potable water CSM / Hypalon (chlorosulfonated polyethylene) the application are in the chemical industry FKM= Viton (Fluoro elastomere) the application are in the chemical industry and production Approval of own test facility Approval of own test facility Resistant against: I water and water dilutions of salts I many of diluted acids and alkalines I polar media as alcohol, ester and ketone I washing agents I hydraulic media based on water-glycol...

Gaskets acc. to DIN 2690 for raised face flanges acc. to DIN EN 1514-1, Form IBC (Inner Bolt Circle) * for cast iron flange dimensions Type KGS/S Sizes at the measurement table s = Thickness s1 = Sealing lip s2 = Sealing body d1 = Inner diameter d2 = Outer diameter Dimension in DIN EN 1514-1 (replaces DIN 2690 ) for the pressure ratings PN 6 to PN 40. The gaskets are made of NR = Vulcanisates of natural rubber (SBR), NBR (Nitril rubber), EPDM (Ethylen-Propylen rubber), CSM/ Hypalon (chlorosul-fonated polyethylene) and FKM = Viton (Fluoro elastomere) every with inside vulcanised steel ring. Example...

Gaskets acc. to DIN 2690 for raised face flanges acc. to DIN EN 1514-1, Form IBC (Inner Bolt Circle)

KLINGER KLINGEITKGS Chemical resistance

Chemical resistance SuA/ecf to technical alterations. Status: March 2012

KLINGER KGS Mounting instructions ® On principle following mounting instructions for KLINGER ®KGS material have to be taken in account. 1. Selection of the gasket The suitable type of gasket material can be selected according the KLINGER information – first of all the chemical resistance. 2. The Flanges Flanges should be parallel, metallically clean and dry, the gasket has to be mounted centrically. Please pay attention to the correct inner- and outer diameter, never the gaskets should tower into the throughhole! The outer diameter of the KGSgasket is adapted to the bolt circle of the flange....