KLINGER > top-sil-ML1Revolutionary combination of synthetic fibresand different elastomers bound in a Multi-Layer*structure.*Patent pendingKLINGER Ζ The global leader in static sealing >

* Detailed information about the Multi-Layer concept can be supplied separately on request. HNBR Matrix ✽ Long-term flexible layer ✽ High thermal stability ✽ Reduced brittleness ✽ Oxidation and ageing resistant Multi-Layer property profile ✽ Optimised curing system ✽ Extended service life and less leakage in spite of high temperatures NBR Matrix ✽ Higher residual flexibility ✽ High network density ✽ Delayed ageing ✽ Low creep under load ✽ Less creep ✽ High strength ✽ High permissible load ✽ High permissible load The layers of the structure arecharacterised by the selection of elastomers. Since...

9. Re-use For safety reasons never re-use a gasket. 8. Retightening Provided that the above guidelines are followed retightening of the gasket after joint assembly should not be necessary. If retightening is considerednecessary, then this should only be performed at ambient temperature before or during the first start-up phase of the pipeline or plant. Retightening of compressed fibre gaskets at higher operating tem- peratures and longer operating times may lead to a failure of the gasket connection and possible blow out. > 7. Joint Assembly It is recommended that the bolts are tightened using...