Catalogs >
KLINGER >
KLINGERSIL C-4430plus

KLINGERSIL C-4430plus
6Pages

Catalog excerpts

KLINGERSILC-4430plus Superior performance at high temperature applications ® + Thermal stability + Life time + High temperature tightness + Safety KLINGER – The global leader in static sealing

Open the catalog to page 1

The many, varied demands placed on gaskets A common perception is that the suitability of a gasket for any given application depends upon the maximum temperature and pressure conditions. This is not the case. Maximum temperature and pressure values alone can not define a material’s suitability for an application. These limits are dependent upon a multiplicity of factors as shown in the diagram opposite. It is always advisable to consider these factors when selecting a material for a given application. Selecting gaskets with pT diagrams The Klinger pT diagram provides guidelines for...

Open the catalog to page 2

KLINGERSIL C-4430plus Four PLUS on safety + Life time + Thermal stability With the market launch of KLINGER ® Quantum – the first fibre reinforced gasket material solely bounded with HNBR – KLINGER ® has revolutionized the world of gaskets. The R&D department of KLINGER ® has taken the experiences which have been gained during the development of KLINGER ®Quantum and applied them on KLINGERSIL® C-4430 – a fibre reinforced gasket material with highest stress relaxation. The result of the usage of the “Quantum technology” is a fibre reinforced gasket material with an extended profile of...

Open the catalog to page 3

KLINGERSIL C-4430plus Four PLUS on safety + + High temperature tightness The most common gasket failures at the use of fibre reinforced gasket materials show up at discontinuous applications because of pressureor temperature changes (ie. steam applications, planned shutdowns, vibrations in the pipeline, etc). Every fibre reinforced gasket material is getting hard and brittle at higher temperatures over time. The gasket therefor shows insufficient flexibility which would be necessary to bear possible additional stresses. This can lead to leakages or accidents and therefor higher costs for...

Open the catalog to page 4

KLINGERSIL C-4430plus Installation instructions The following guidelines are designed to ensure the optimum performance of our gasket materials: 1. Choosing the gasket There are many factors which must be taken into account when choosing a gasket material for a given application including temperature, pressure and chemical compatibility. Please refer to the information given in our brochure or, for advice to our software program KLINGER ®expert. If you have any questions regarding the suitability of material for a given application please contact Klinger Technical Department. 2. Gasket...

Open the catalog to page 5

KLINGERSIL C-4430plus Technical data Typical values Compressibility ASTM F 36 J Recovery ASTM F 36 J Stress relaxation DIN 52913 I Uses High pressure gasket for universal applications. Suitable for use with water and steam at higher temperatures as well as to oils, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants. Premium material grade with outstanding stress retention. I Dimensions of the standard sheets Sizes: 1000 x 1500 mm, 2000 x 1500 mm. Thicknesses: 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm; other thicknesses and...

Open the catalog to page 6