KLINGERSIL C-4409 Greater security by high thermal and mechanical stress KLINGERSIL® C-4409 High-pressure gasket, synthetic fibres bonded with NBR. High mechanical resistance by expanded metal. Chemical resistance against oil, hydrocarbons, water and steam as well as liquid and gaseous chemicals. KLINGER – The global leader in static sealing

KLINGERSIL C-4409 Information for your safety The many and varied demands made on gaskets The successful operation of a gasket depends upon a multiplicity of factors. Many who use static gaskets believe that the values quoted for maximum admissible temperature and maximum operating pressure are inherent properties or characteristics of gaskets and gasket materials. Important points to be observed The selection of gaskets requires expertise and know-how since ever greater reliability coupled with the lowest possible leakage rates are demanded of gasket materials. The exacting demands made on the...

KLINGERSIL C-4409 Information for your safety The fields of decision 100 If your operating temperatures and pressures fall within this field, a technical examination is normally unnecessary. If your operating temperatures and pressures are within this field, a technical examination is recommended. If your operating temperatures and pressures are within this ”open” field, a technical examination is always necessary. So why does Klinger provide pT diagrams? For the reasons given the pT diagram is not infallible: it serves as a rough guide for the end user who often has only the operating temperatures...

KLINGERSIL C-4409 Technical data Klinger cold/hot compression With this test method developed by Klinger you can evaluate the cold/hot compression of a gasket in cold and hot condition. Unlike the method acc. to DIN 52913 and BS 7531, the surface load is kept constant during the complete test so that the gasket is exposed to much tougher conditions. The thickness decrease at an ambient temperature of 23°C and at heating up to 300°C is measured. The indicated thickness decrease at 300°C refers to the thickness obtained after loading at 23°C. Dimensions of the standard sheets Sizes KLINGERSIL®...